Stock Map for MPI

popup · Post by **popup** » Mon Sep 15, 2014 3:45 am

Does anyone have a fuel and ignition map for an MPI? Just enough to get the car moving about to travel to get it mapped?

Post by **Alspos** » Mon Sep 15, 2014 9:26 am

You need to tell us what computer you are using. Does the manufacturer have a base map you can download that can be used for startup?

Schultz · Post by **Schultz** » Mon Sep 15, 2014 9:29 am

I thought all computers had a base map in it? and when you get it Dyno tuned they modify these base maps?

popup · Post by **popup** » Mon Sep 15, 2014 8:10 pm

It would be an EVO 8 ECU so perhaps the stock map will be OK? Perhaps just back the timing off a little?

redzone · Post by **redzone** » Tue Sep 16, 2014 9:49 am

If you are using the evo 8 injectors & right fuel pressure it should start at least. Don't know if I'd drive it though.

ProZac · Post by **ProZac** » Tue Sep 16, 2014 3:52 pm

If you're running the EVO VIII air flow meter and injectors you should be pretty close, close enough to drive it to a tuning shop anyway.

fugazi · Post by **fugazi** » Tue Sep 16, 2014 10:09 pm

^ As above said.... and hook off the WG-arm so it fully open on the way over to the tuner....

Austarion