5 stud conversion

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

5 stud conversion

Post by Vulpes »

ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Should do, yes. They're the right centerbore and stud pattern... But I'm sure I've read that any sort of wheel spacers are illegal in Australia?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Yes they are illegal. Void your insurance.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Pardon my ignorance, but wouldn't that only be held on with 3 nuts?
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Those ones, the way they've made them, yes. Stupid! The ones I've seen before use a wheel nut with a stud sticking out the end for the shared hole.
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Ahhh, thinking about it, I reckon they just haven't photographed it very well. The stud in the hub for the shared hole is replaced with the longer one, then the spacer fitted with a low profile wheel nut, which the wheel goes over. There is then enough thread left on the stud to put on another nut, holding the wheel on.
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

If you look at the last photo the stud with the round end isn't in the spacer, you use it to replace one of the stud on the hub, its longer to account for the spacer.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

Illegal ????? This is Austarion right and we care about illegal :) Technically just about everybodies wheels here would be illegal
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

For me, the only real reason you would convert to 5 stud is to use the widey wheels. Doing it with spacers, you don't get the brake upgrade
with slightly larger rotors etc. However with the 25mm spacer, widey wheels are out of the question really with a 18mm - 25mm = -7 offset.
A 15mm spacer would be more appropriate for a 16x7 (+18) widey wheel, resulting in a +3 offset.
You would generally need to use FWD wheels (<~26+ offset) out there which are plenty out there. Or any EVO Lancer and Magna factory 5 stud wheels...

For a JA staz with the standard wheel at 14 x 6in, strictly speaking you could only really go max 16 x 7 in NSW in wheel size.
I suppose using 5 stud spacers, it's a relatively quick way to dress up the staz with a set of easy to get fresh wheels.
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Vulpes wrote:Illegal ????? This is Austarion right and we care about illegal :) Technically just about everybodies wheels here would be illegal
Some would be, 18s or larger definitely, but 16s on JA and 17s on JBD you could get away with as long as the width wasn't too silly.
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

I have 17x7's and no spacers and 225x45x17 tyres that as near as dammit spot on same rolling diameter as the stock JB 15inch wheels and tyres.
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

You southerners have to remember that not every state enforces that stupid plus 2 rule like nsw does, and actually goes off rolling diameter, track width and whether the combo clears everything!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

The only reason I would change to a five stud pattern is because V5 Simmons are a dime dozen. V4 114.3 are like rocking horse shit.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Ford pattern v5's are worth big bucks, I see datsun pattern v4s for sale cheaply quite often. Where are you looking?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests