FS: JA steering set up, twin cam bits, wheels, JB bar

Mick · Post by **Mick** » Wed Apr 30, 2014 8:45 pm

Hi all,

For sale:

1. complete steering system from a JA with twin cam.
- Steering box was rebuilt 200km ago by National Power Steering in Sydney for $600.
- New bushes
- Twin cam power steering pump and belt, has always been ok but isn't new.
- Fake braided lines and polished reservoir.
- All arms and links
- 300x400 approx. cooler with lines correct length to mount in front of radiator.
Removed the whole fluid system to investigate a leak and then decided to go rack and pinion so out it all came.
No idea of what its worth but would be looking at around $500 for the bunch I guess, or whatever a reasonable offer is.

2. Twin cam inlet manifold reversed to suit RWD setup. Vr4 ECI style. Wire wheel polished and looks pretty good. Nicely finished welds and bolt on 2.5" intercooler pipe adaptor. Standard throttle body with blanked off idle control.
$150

3. Twin cam thermostat relocation chamber/pipe. Nicely tig welded rectangular aluminium section that puts the thermostat nicely out of the way behind the standard twin cam manifold described above. Its always worked great but wont fit with hypertune manifold that may or may not ever be installed :roll: . All bolts, save yourself a headache if converting. $100

4. Set of 19" ROH Modena 4 stud wheels with almost new tyres. Large and dishy. Beautiful wheel for street/show/cruise car but am looking to circuit race and need some sidewall.
Offers.

5. Redzone fibreglass JB front bar with lights to suit. $200

For info on any of this stuff call 0408 337 886. will sms photos on request.

mteck · Post by **mteck** » Wed Apr 30, 2014 10:51 pm

Text sent

enthuzed · Post by **enthuzed** » Thu May 01, 2014 10:37 am

Mick, what details do you have about the rack & pinion setup you put in?

Good luck with your sales.

mteck · Post by **mteck** » Thu May 01, 2014 11:12 am

Also keen to hear about this swap

Mick · Post by **Mick** » Thu May 01, 2014 4:00 pm

Its in the early stages but had a tip on a Hyundai rack from a 97 from John on this forum.
It need to be modified in width to suit the starion ends and have the same geometry as the standard steering arc.
Then needs to link up to factory column and be bolted to a fabbed up crossmember.

ProZac · Post by **ProZac** » Thu May 01, 2014 7:37 pm

Don't want to clutter up for your sale thread, but I;d also be really keen on some pictures and details of your rack swap, as I'm currently doing the same thing.

Is it a power steering rack?

Cheers.

mteck · Post by **mteck** » Thu May 01, 2014 8:29 pm

I vote you make a build thread !

Mick · Post by **Mick** » Fri May 02, 2014 7:15 am

No dramas at all, will take photos as it progresses, and if there is interest will post it up.
Mteck, sms'd you back yesterday did you get it?
Prozac, its non power rack, no pump, no pulley, no lines :)

mteck · Post by **mteck** » Sat May 03, 2014 4:40 pm

Yeh, sure did. Postage is going to blow it right out of budget. Thanks anyways

Mick · Post by **Mick** » Sat May 03, 2014 5:02 pm

Mteck, got a quote for the bar and lights to melb CBD for around $40, doesn't sound too bad!

callan_rs2000 · Post by **callan_rs2000** » Wed May 07, 2014 2:53 pm

if bar and lights available still can I come and have a look on the weekend?
cheers

starionc · Post by **starionc** » Wed May 07, 2014 3:24 pm

G'day Mick
Have you got any pics of the Twin cam intake manifold and water pipe?
What would the postage be to Sydney?
Cheers Jason

Austarion

FS: JA steering set up, twin cam bits, wheels, JB bar

FS: JA steering set up, twin cam bits, wheels, JB bar

Who is online