FS: JA steering set up, twin cam bits, wheels, JB bar

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

FS: JA steering set up, twin cam bits, wheels, JB bar

Post by Mick »

Hi all,

For sale:

1. complete steering system from a JA with twin cam.
- Steering box was rebuilt 200km ago by National Power Steering in Sydney for $600.
- New bushes
- Twin cam power steering pump and belt, has always been ok but isn't new.
- Fake braided lines and polished reservoir.
- All arms and links
- 300x400 approx. cooler with lines correct length to mount in front of radiator.
Removed the whole fluid system to investigate a leak and then decided to go rack and pinion so out it all came.
No idea of what its worth but would be looking at around $500 for the bunch I guess, or whatever a reasonable offer is.

2. Twin cam inlet manifold reversed to suit RWD setup. Vr4 ECI style. Wire wheel polished and looks pretty good. Nicely finished welds and bolt on 2.5" intercooler pipe adaptor. Standard throttle body with blanked off idle control.
$150

3. Twin cam thermostat relocation chamber/pipe. Nicely tig welded rectangular aluminium section that puts the thermostat nicely out of the way behind the standard twin cam manifold described above. Its always worked great but wont fit with hypertune manifold that may or may not ever be installed :roll: . All bolts, save yourself a headache if converting. $100

4. Set of 19" ROH Modena 4 stud wheels with almost new tyres. Large and dishy. Beautiful wheel for street/show/cruise car but am looking to circuit race and need some sidewall.
Offers.

5. Redzone fibreglass JB front bar with lights to suit. $200

For info on any of this stuff call 0408 337 886. will sms photos on request.
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
mteck
I like starions more
Posts: 177
Joined: Mon Nov 12, 2007 6:15 pm
Location: Melbourne

Post by mteck »

Text sent
Drive fast, ride even faster
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Mick, what details do you have about the rack & pinion setup you put in?

Good luck with your sales.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
mteck
I like starions more
Posts: 177
Joined: Mon Nov 12, 2007 6:15 pm
Location: Melbourne

Post by mteck »

Also keen to hear about this swap
Drive fast, ride even faster
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

Its in the early stages but had a tip on a Hyundai rack from a 97 from John on this forum.
It need to be modified in width to suit the starion ends and have the same geometry as the standard steering arc.
Then needs to link up to factory column and be bolted to a fabbed up crossmember.
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Don't want to clutter up for your sale thread, but I;d also be really keen on some pictures and details of your rack swap, as I'm currently doing the same thing.

Is it a power steering rack?

Cheers.
mteck
I like starions more
Posts: 177
Joined: Mon Nov 12, 2007 6:15 pm
Location: Melbourne

Post by mteck »

I vote you make a build thread !
Drive fast, ride even faster
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

No dramas at all, will take photos as it progresses, and if there is interest will post it up.
Mteck, sms'd you back yesterday did you get it?
Prozac, its non power rack, no pump, no pulley, no lines :)
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
mteck
I like starions more
Posts: 177
Joined: Mon Nov 12, 2007 6:15 pm
Location: Melbourne

Post by mteck »

Yeh, sure did. Postage is going to blow it right out of budget. Thanks anyways
Drive fast, ride even faster
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

Mteck, got a quote for the bar and lights to melb CBD for around $40, doesn't sound too bad!
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
User avatar
callan_rs2000
OoOhhh BabY
Posts: 69
Joined: Fri Jun 18, 2010 12:20 pm
Location: Hobart

Post by callan_rs2000 »

if bar and lights available still can I come and have a look on the weekend?
cheers
Mazda Capella - RX2 project/group n car
Mk 2 Escort RS2000 - repairable write off :'(
Starion - track car
Lancer GSR - daily drive
starionc
I love starions
Posts: 479
Joined: Wed Sep 14, 2005 11:50 am
Location: sydney
Contact:

Post by starionc »

G'day Mick
Have you got any pics of the Twin cam intake manifold and water pipe?
What would the postage be to Sydney?
Cheers Jason
How many Starions can one man drive!!

Check out my website: www.aboutstumpgrinding.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests