New garage setup ideas

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

New garage setup ideas

Post by Lunacy »

Hey all
Well its looking highly likely that we will be leaving the big smoke later this year and moving down to Tauranga.
Were going to be building a house there, off the plans with a few modifications. Garage is a 6m by 6m with internal access.
Im looking into what things i should have installed at the build phase to save hassle later on.
Wifey says underfloor heating and a pit are both out of the question haha :-)
So far ive come up with at least 4 double power points, and a 15amp plug for welders. Lighting wise was thinking fluro tubes everywhere although im not that knowledgable in that area.
Will be building my own stainless workbench, and partitioning off a corner with a separate bench for cutting, grinding and welding.
The starion plus parts have the whole space too :)

If anyone has any other things that they think should go in or ideas or thoughts post them up pls - as options are open at the moment.
Cheers
Image
MainstreaM
I've been here before
Posts: 201
Joined: Sat Nov 20, 2004 7:04 pm
Location: USA
Contact:

Post by MainstreaM »

Image
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

MainstreaM wrote:Image
Beat me to it :D
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Firebrand
I like starions
Posts: 117
Joined: Wed Oct 11, 2006 12:24 pm
Location: Wellington, NZ
Contact:

Post by Firebrand »

beer fridge?

Good luck with the build mate, should be awesome.
1983 Starion GSR-II (TD05)
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Air lines inside the walls. Kick ass stereo...
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

As much as id love the hoist dont think the 2.4m stud height will quite handle that!
Air lines now thats a gd idea!
And stereo is already sorted :-)
Image
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Try to wallmount EVERYTHING, 30cm's up or so.
Realy easy to sweap the floor!
And you can't have to much light!!!
Image
User avatar
Neil
Big Dorifto
Posts: 85
Joined: Sat Feb 23, 2008 8:52 am
Location: Jerrabomberra, NSW

Post by Neil »

At this early stage I would definitely factor in some plumbing - I always wished I had a tap & sink in my garage - if you don't do it now it probably won't ever happen..

and second the beer fridge - MUST have!
1987 JD Starion
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Great idea guys :beer
Beer fridge will be factored in.
As for sink, well unfortunately i have to give up one corner to the washer dryer and tub so thatl be handwashing station :-)
Image
T-man
I like starions
Posts: 119
Joined: Wed Aug 24, 2011 7:57 am
Location: Sunny Scotland

Post by T-man »

What about a mirrored ceiling and a pole for the half naked ladies? Ohhhh yeeehhhh baby!
Third the beer fridge!!!!!!
Theres only two people that can stop a run away bus, and am both of them.
GasJA
I like starions
Posts: 111
Joined: Tue Oct 31, 2006 10:39 pm
Location: Geelong

Post by GasJA »

A charging point for your Electric Vehicle. LOL
Interesting website for EV's
http://www.autovolt-magazine.com/catego ... -charging/
4G63 hard to live with
hard to live without..
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

All the good suggestions have been taken... so...

Burn out pit.

-Robert
Image
Now: Australian Compatible!
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Make sure that dryer is well ducted outside, don't want the moist air rusting all your bare metal parts! :-).
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

How about increase the size to 6.4 x 6.4m, particularly Width to allow for some side shelving!
And don't forget the black & white chequered tile flooring :D
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
perrinsohc
Mine is bigger than yours
Posts: 315
Joined: Sat Mar 20, 2010 4:53 pm
Location: Sydney/Christchurch

Post by perrinsohc »

Lighting is always great, i upgraded two 100watt incandescent bulbs to these brilliant fluorescent tube lights. Not casting a shadow is awesome! Wall mount everything where possible haha.

Image
Image
Image
Last edited by perrinsohc on Mon Mar 31, 2014 7:11 am, edited 1 time in total.
Image


87 Starion EX
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests