IMSA race Starion and SCCA & Pike's Peak race Mighty Max

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

IMSA race Starion and SCCA & Pike's Peak race Mighty Max

Post by Komeuppance »

My good friend/Mitsubishi addict, Airbats/City Hunter, found the Team Mitsubishi Mighty Max for sale locally here in Oregon... of course we had to go and check it out.

Image
So bad ace, he couldn't resist buying it.

It came with some spare parts, which were at a shop not far away. We then learned that the shop owner, Fred Lux, was THE guy who built the Coors Racetruck Challenge trucks for Team Mitsubishi/Dave Wolin, which they also took to Pike's Peak. He also built the IMSA Starion for the same team as well as quite a few other Mitsu's.

We ended up BS'n with him for hours, before even looking at the engines we were supposed to pick up haha. His shop workers might have liked the disruption we caused because they started taking smoke breaks to listen to the stories. I could tell he was also a Mitsubishi addict, he liked to use the term "cheap speed" in talking about the turbo vehicles. We had discussed about modifications for Starions vs what they did back then. He also told us stories of the glory days, how stingy Mitsubishi was, as well as adventures and exploits... Mitsubishi lovers must be cut from the same cloth lol.

One of his first "claims to fame" was a story about the one of the race trucks, crashing through a pile up at high speed at Pocono raceway. One of the big national papers printed a caption that read something like "Mitsubishi truck crashes and turns into ball of flames flying down the track", in the picture they printed, his name on the truck was just barely visible. A proud moment, he joked.

Here is one of the pictures he has, almost center stage, amidst the pictures of race Vipers and Vettes he's built over the years:
Image
The mythical Starion in IMSA class, among the pictures of Eclipses he'd built, right behind a giant trophy for a Viper race.

Here's a picture from Dave Wolin's site:
Image
Fred Lux, window side at Road Atlanta 1988.

His shop now builds Vipers and Porsches for a national race series, I forgot which, as well as robotics for police and government. He still campaigns a Mitsu in the ChumpCar series, a twin stick turbo Mirage.

He also showed us this "drift" big wheel they take to race events, which they like to park next to the line up of Ferrari's or Buggati's, and steal the show.
Image
And here he is demonstrating it for us, out in the front of the shop lol.

It was great to hear the stories, and see how laidback the man was. Just wanted to share with ya'll. Maybe my friend will post up more about his new racetruck and some more about the legend of Fred Lux and Team Mitsubishi.

In the meantime, here's a refresher about the Starion from current owner Chad (also a local Oregon member):
Image
Lime Rock 1988

This IMSA RS 1988 Mitsubishi Starion ESI-R actualy started out it's life in 1984. That's right, it's an 84 chasis. It was a daily driver for Mitsubishi Vice president Dick Recchia in 1984. Later it was purchased by Dave Wolin for Team Mitsubishi to be converted to a race car.

Dave Wolin built all the race cars for Team Mitsubishi in the US and his cars were raced all over the world, including the Parisi-Dakar ralley. He has a breif list of his acomplishments on his own web site at www.davewolin.com.

This car was striped to a shell and every single part inclding the unibody chasis was acid dipped to remove all the undercoating and paint. It was then handed over to the race building team for a major build. It took Wolins small crew 14 hours a day, 7 days a week for 3 months to build this car. Parts that weren't painted white were all zink coated and lightend where ever possible. According to Dave, this car is 500 pounds lighter that a show room stock car.

It was the first and only Starion to be built in this fashion. It was entered in the 1988 IMSA "International Sedan Series". This class required the use of a stock motor and drive train, but thats the only sinlgle stock item on the car. Despite the stock motor internals there were a few liberties taken when building this car. They include a slightly modified fuel computer and a straight through side exit exhaust was used. It is rated at 177 HP in show room stock form, this motor is at about 220 HP according to Dave. It has had the balance shafts removed and the jet valves were eliminated and welded up, it is also balanced and blueprinted. The rest of the motor and drive train is all stock.

One special thing about this car is that it is the ONLY US Team Mitsubishi Starion in existance, all the prior year cars were striped when they reached the end of thier useful life and the parts were used on the next years cars. There is evidence of some of the previous cars body parts being used in this car like red paint showing through in a few places. All Show Room Stock cars in 1986 and 1987 were red. This represents the last Starion built so it is the only one left. Dave told me he estimated it to have cost about $100,000 to buiild, if you look at all the small details you can easily see he under estimated that figure. It is an extreme example of the best you could do to a Starion.

This car was only raced in 4 events so it is still in pristene condition, it even won most of those races. I am currently working on a complete restoration, it will look the same as it does now but be in pre-race condition. I'll most likely race it at Portland International Raceway and occasionaly in some of the tracks in California when I finnish the restoration. After this car was raced in 1988, it was retired and has been on jack stands ever since. The Starion program was droped at the end of 1988 for the new Mitsubihi Eclipse program. Soon after the Eclipse program began, Mitsubishi cut it's race programs due to funding issues.

Mitsubishi completely dominated the "Show Room Stock" series of racing, taking home more first place finnishes than all other teams in 1986-87. This series consisted of taking a bone stock car straight from the dealer and putting a few safety items on, then taking it straight to the track. Dave told me the primary reason for it's success was the large fuel tank, excelent cooling system, and rock solid engines. Especialy in the 24 hour races, large fuel tanks means fewer pit-stops, nad efficent cooling extends the reliability. Some cars were equaly fast and good in handeling, some had similar fuel capacities, but this car had it all. In all the races the team ran they never lost a single motor, This includes the 24 hour races. When they first enterd the show room stock class in 1984, the won every single race that year!
-Robert
Image
Now: Australian Compatible!
User avatar
Schultz
I like starions
Posts: 139
Joined: Wed Apr 09, 2008 7:00 pm
Location: Kingaroy QLD

Post by Schultz »

G'day Komeuppance,

I wish I could have been there. I could talk about cars all day long without taking a breath. Always liked to listen to stories about good cars in the good old days. :beer
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

that's awesome man! Thanks!

I wish we could get details on what parts were lightened and how
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

thrash wrote:that's awesome man! Thanks!

I wish we could get details on what parts were lightened and how
SPEED HOLES :pimp
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

:beer Great write up and history lesson :beer
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

redzone wrote:
thrash wrote:that's awesome man! Thanks!

I wish we could get details on what parts were lightened and how
SPEED HOLES :pimp
lol, i figured that much, but to shed 200 odd kilos without weakening the structure of the car too much.. that's a LOT of well placed speed holes...
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Whoa, that's some cool shit! Sounds like Oregon is the place to be for a Mitsy fanatic in the US.
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Brilliant writeup Rob, didn't know you had it in ya :wink:
Any more??
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

thrash wrote:
redzone wrote:
thrash wrote:that's awesome man! Thanks!

I wish we could get details on what parts were lightened and how
SPEED HOLES :pimp
lol, i figured that much, but to shed 200 odd kilos without weakening the structure of the car too much.. that's a LOT of well placed speed holes...
Apparently the guy who built the roll cage and other stuff for them took so long because he was making it "beautiful" and using dimple dies on brackets that didn't need to be fancy at all. To get the correct weight to the car, instead of adding weighted plates, the guy added it inside the hollow tubing of the roll cage. A bunch of over the top ways to do things haha.

One of the issues they were having with the Starion was breaking axles, not because of power, but because the diff mounts would flex too much causing the diff to rotate and put a bad angle on the axle shafts. They fixed it with custom mounts.
enthuzed wrote:Brilliant writeup Rob, didn't know you had it in ya :wink:
Any more??
Lol... I can do a lot more than get drunk and harass aussies on the internet.

Another of the stories I recall from Mr. Lux:

When they were at Pike's Peak with the Eclipse program, he said you were well up the mountain and could feel the ground shaking, accompanied by a "thud" sound. Apparently it was the Eclipse's body slamming on the ground as it was racing up the course. You could feel the ground shake before you could hear the car. He said they added an 1/8" steel plate for a belly pan after that lol.

Here's a shot of the trucks at Pike's Peak:

Image

Image
Swept the podium, haha. Charlie Hexom was the owner of the truck my friend bought, he raced the trucks and Eclipses. Hexom sold the truck to a friend of Fred Lux's, Keith who is also a cool dude.

Keith's plans for the truck were to bring it back to it's glory, but Staz 2.6 swapped. He used TEC engine management, modified stock intake for MPI, water to air intercooler, 3" side dump exhaust, and turned the stock 12a turbo up to 14psi and pulled somewhere around 240hp.

-Robert
Image
Now: Australian Compatible!
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Any details on the custom diff mounts ?????????
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

He said something about Chevy motor mounts. Anything to keep the diff properly located would be better than the flexy stockers, haha.

Here's a video of the trucks racing, real bumper to bumper action as they had to draft each other to get to the front. I linked the video to start at the overview of one of the Mitsu trucks, which needed a handicap apparently because of all the power it was making. Fred Lux said that the Jeep Comanche trucks were campaigned by a guy who had good connections, which somehow allowed them to run built motors and custom cams in a "showroom stock" class, and driven by the Archer brothers who were good at cheating. Those Jeeps were a heap of junk, and that was the only way those things ever made it to the front of the pack (my words lol). Just a bit after the overview in the video, they make a note about the Archer brothers, who also drove the Heep Comanche's, getting disqualified in another class for vettes... due to technical discrepancies lol, no surprise there.

Enjoy, this is some good racing.
http://youtu.be/ZnSYj1hAPs0?t=8m59s

By the way, the drafting in the video is the cause for the "flaming" truck I mentioned in the first post. Fred Lux was saying they'd get two lines of 10 to 14 trucks drafting each other, and when one line would move faster "you'd have to smash your way out and into the other".

-Robert
Image
Now: Australian Compatible!
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

*like*
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

that truck is a legit piece of motorsport history, what engine combo was it running??
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

It was a showroom stock class, it ran a g54b, stock carb. Couldn't even change the timing, they got busted for having too much advance one race.

-Robert
Image
Now: Australian Compatible!
Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests