Starion/evo oil pump DOHC convertion.

T-man · Post by **T-man** » Mon Apr 22, 2013 12:32 am

Hi all, after some head scratching and several cans of red bull I've finally got the starion pump to fit. I managed to space out very slightly the shaft for the oil pump pulley so it can accomadate the wider pulley. I shaved a bit off the pump casing where the hydraulic tensioner arm hits and made spacers for the hydraulic tensioner mounting points. Is there anything I've missed that I shouldn't use the modified starion pump?

Thanks in advance,
T-man.

OLD FART · Post by **OLD FART** » Mon Apr 22, 2013 5:07 am

If it's the water pump you are talking about then I just machined /ground off the casting bits where needed. no spacers required to hyd tensioner in my 6 bolt wide block.

T-man · Post by **T-man** » Mon Apr 22, 2013 6:16 am

No no bud it was the oil pump I was talking about. Sorry for the misunderstanding.

T-man

dwlee · Post by **dwlee** » Mon Apr 22, 2013 9:32 pm

Use the front cover and oil pump off a 6-bolt dohc 4g63. You shouldn't have to modify anything other that the rwd water pump to make it work.

T-man · Post by **T-man** » Mon Apr 22, 2013 11:19 pm

Hi bud we don't get that model of Mitsubishi over here in the uk hence the modifications.

Cheers
T-man

Austarion

Starion/evo oil pump DOHC convertion.

Starion/evo oil pump DOHC convertion.

Who is online