Parting out an '89 Widebody

MotoCam360 · Post by **MotoCam360** » Mon Feb 18, 2013 5:19 am

I have a good 3piece spoiler available:

Tail lights have small holes drilled in the bottom to let water out - so they're no good in my opinion.

Let me know what you need before this car goes to the crusher this week.

1320ft · Post by **1320ft** » Mon Feb 18, 2013 7:24 am

How much for the 3 piece spoiler?

JDSTAZ45 · Post by **JDSTAZ45** » Mon Feb 18, 2013 9:05 am

Are the side markers (with amber reflectors) available? Unfortunately the grill piece is too long to ship via USPS.
Also interested in radio surround with metal stereo brackets....

Taillights are still fine to the Aussie buyer providing the lenses are not heavily crazed or cracked.
Obviously they could be cleared to allow for use on our roads, ie., the red blinker section is not allowed.
:beer

mteck · Post by **mteck** » Mon Feb 18, 2013 9:07 am

Can the front 1/4 be shipped over ? Will they bolt upto a narrow body ?

dirtygalant · Post by **dirtygalant** » Mon Feb 18, 2013 9:52 am

SHP rims?

FST4RD · Post by **FST4RD** » Mon Feb 18, 2013 3:36 pm

Lsd, axle and torque tube? And shipping to NZ to see if its worth it.

MotoCam360 · Post by **MotoCam360** » Tue Feb 19, 2013 4:47 am

I'm keeping the SHPs for our Starion collection.

Are you asking if the front fenders can bolt up to a flatty? If so, somebody would have to confirm this.

Yes I have the front side markers available.

Shipping the LSD, torque tube, and axles to NZ would not be cheap...these parts are HEAVY. I would venture to say that's probably $200 in shipping based on the weight.

Starion VR4 · Post by **Starion VR4** » Tue Feb 19, 2013 7:12 am

MotoCam360 wrote:I'm keeping the SHPs for our Starion collection.

Are you asking if the front fenders can bolt up to a flatty? If so, somebody would have to confirm this.

Yes I have the front side markers available.

Shipping the LSD, torque tube, and axles to NZ would not be cheap...these parts are HEAVY. I would venture to say that's probably $200 in shipping based on the weight.

If FST4RD doesn't go ahead I will, shipping to Australia. PM me your back Details

JJH · Post by **JJH** » Tue Feb 19, 2013 9:17 am

Re. shipping LSD, torque tube etc.
I found the cheapest way to get a diff over hear was via on-line courier door-to-door service, and it cost me over $350 about 18 months ago.

MotoCam360 · Post by **MotoCam360** » Tue Feb 19, 2013 10:14 am

What do you mean "on-line courier door to door" exactly?

I'm sure we can do better than those rates with our company DHL account.

Thanks,

Tim
MC360

Starion VR4 · Post by **Starion VR4** » Tue Feb 19, 2013 10:21 am

MotoCam360 wrote:What do you mean "on-line courier door to door" exactly?

I'm sure we can do better than those rates with our company DHL account.

Thanks,

Tim
MC360

Well if FST4RD opts out I'm in. :beer

MotoCam360 · Post by **MotoCam360** » Tue Feb 19, 2013 10:30 am

I got you Starion VR4.. you have next-ups on this

Starion VR4 · Post by **Starion VR4** » Tue Feb 19, 2013 10:32 am

Thanks Tim... Did 1320Ft take the 3 piece unit? If not I will.. :beer

Post by **Alspos** » Tue Feb 19, 2013 10:35 am

MotoCam360 wrote:What do you mean "on-line courier door to door" exactly?

I'm sure we can do better than those rates with our company DHL account.

Thanks,

Tim
MC360

There are companies online that will deliver stuff. But I would use DHL or similar so at least you have better traceability if the thing goes missing. Post won't touch it cos it will be too heavy.

A note on the side markers, they will not direct fit into a flatty, they will need to be trimmed to fit. Upcoming story on that one when I get around to it :)

MotoCam360 · Post by **MotoCam360** » Tue Feb 19, 2013 10:35 am

He hasn't replied to my PM yet....give him a day or 2, then it's yours.

Austarion

Parting out an '89 Widebody

Parting out an '89 Widebody

89 widebody

Who is online