Everyone knows the original rear spoiler on a Staz is most likely a piece of crap by now. I was talking to a friend, he had an offcut of an ebay special spoiler that he put on his daughters car. I grabbed it and well...pics below.
It is a plastic material, can be easily cut with a hacksaw and can be sanded fairly easily. I cut the edge straight, used the bench grinder on it and sanded it for 30 seconds with 120 and got reasonable results. A bit of time and some polish and you should be able to get it looking pretty good. It has two strips of double sided tape along the bottom. Obviously it's not as big as stock but I think it looks fairly subtle...may have to go on my christmas list.
