FS: 59mm TB upgrade for L300 MPI manifold

[enthuzed]

Got this throttle body hanging around that needs a new home.

It measures 58 or 59mm at the butterfly and has 65mm centres (square) so it will bolt straight onto a stock L300 MPI manifold.

This is a large increase over the standard L300 TB.

Comes with the Mikuni cold start bypass assembly too.

$80 plus freight.

I'll whack some photos up here soon. :)

[enthuzed]

Here they are side by side, butterflies lined up. A big difference:

TB mounted on standard L300 manifold (I cut the runners off)

It fits perfectly and you can bolt whatever you like to the front.
Get the die-grinder in there and take out 4-5mm of material. Then a bracket for the accelerator cable mounting. A real easy mod!