WTB - starion air intake pipe

perrinsohc · Post by **perrinsohc** » Thu May 10, 2012 9:24 pm

Hey guys,

I need another one of these as the rubber/plastic that clamps to the turbo is so worn that it all broke apart and I can't run my air intake anyone. Anyone want to tell me the piece between turbo and airbox?

Cheers!

ProZac · Post by **ProZac** » Thu May 10, 2012 10:32 pm

Dude, these are a real common problem spot on Starions, mine is also pretty stuffed. JAS might have something, but if not, you could get some pipe, some silicon joiners/bends/reducers and make one up yourself. I did it in a Sapporo I used to own, worked fine. Your's is even easier because you don't have a fuel tank vent to plumb in :).

kiwieurospec · Post by **kiwieurospec** » Fri May 11, 2012 6:14 am

I bought one for a 82 Pajero from Mitsubishi lately and it wasn't expensive, worth a try although unlikely.

enthuzed · Post by **enthuzed** » Fri May 11, 2012 10:42 am

Alspos created a DIY intake hose a while ago.

No pics though.

www.forums.austarion.com/viewtopic.php?t=12407

enthuzed · Post by **enthuzed** » Sat May 12, 2012 1:18 am

What about this?

http://www.ebay.com/itm/MK1-BLUE-SILICO ... 6a&vxp=mtr

The ports don't look like they are in the right direction though...

sucka · Post by **sucka** » Sat May 12, 2012 10:41 am

enthuzed wrote:What about this?

http://www.ebay.com/itm/MK1-BLUE-SILICO ... 6a&vxp=mtr

The ports don't look like they are in the right direction though...

They are for a 4G54 as fitted to us widebodies. theyll fit but the power steering reservoir has to be relocated.

perrinsohc · Post by **perrinsohc** » Fri May 18, 2012 12:34 pm

Thanks guys, might hit up Jason and see if anything is going :)

thrash · Post by **thrash** » Fri May 18, 2012 1:18 pm

I have one, but it's not in the best condition either. not completely ripped, but getting there

niss720 · Post by **niss720** » Fri May 18, 2012 6:31 pm

i used a cordia one, not exactly the same shape but it does the job!

Dash · Post by **Dash** » Sun May 27, 2012 12:39 am

Have the same problem, and got quoted from Mitsubishi NZ$200 for a genuine replacement. Not sure which way to go, custom or genuine.

Post by **Alspos** » Sun May 27, 2012 9:59 am

enthuzed wrote:Alspos created a DIY intake hose a while ago.

No pics though.

www.forums.austarion.com/viewtopic.php?t=12407

Pics are back if it helps.

FST4RD · Post by **FST4RD** » Tue Jun 12, 2012 7:37 am

Not to sure if you seen this?

http://www.trademe.co.nz/motors/car-par ... 010907.htm

starionc · Post by **starionc** » Sat Jun 16, 2012 8:32 pm

FST4RD wrote:Not to sure if you seen this?

http://www.trademe.co.nz/motors/car-par ... 010907.htm

That's cheap, as long as the ends are ok!

$200NZ New From Mitsubishi is not unreasonable either!!!!! The after market ones from USA will work out to be over $120NZ buy the time you get it!!

Cheers
Jason

Austarion

WTB - starion air intake pipe

WTB - starion air intake pipe

Who is online