My sigma turbo wagon
My sigma turbo wagon
Well Im an addict lol A mitshbishi turbo addict.
Found this sigma wagon on trade me and got it at a good price.
Its a 1984 Sigma Super. NZ new not a import. Must have been the high grade one as its got P/Steering, 4 electric windows, C/Locking and A/C.
At some stage many years ago someone has fitted a starion turbo motor and 5 speed, with a disc brake rear end.
Its got rust on the roof where the roof rack screws on and in the bottom of both front doors.
Its been de-regoed since 1998 and hasnt been started in 4 years after the guy that owned it got very sick over a long period and died a few years ago. Bought it off his widdow.
I replaced a fuel line as one was missing, and a P/Steering hose, hooked a battery up to it and put some gas in the tank as it was bone dry. Turned the key and fuel poured out from under the rear. Replaced another fuel line and tried again. This time fuel poured out from around the top of the inlet mainfold. I pulled it apart and replaced a few O rings. Tried it again and it started!! Ran smoothly after a few seconds.
Ill take it for a run up the road tomorrow to see how it drives :)
Found this sigma wagon on trade me and got it at a good price.
Its a 1984 Sigma Super. NZ new not a import. Must have been the high grade one as its got P/Steering, 4 electric windows, C/Locking and A/C.
At some stage many years ago someone has fitted a starion turbo motor and 5 speed, with a disc brake rear end.
Its got rust on the roof where the roof rack screws on and in the bottom of both front doors.
Its been de-regoed since 1998 and hasnt been started in 4 years after the guy that owned it got very sick over a long period and died a few years ago. Bought it off his widdow.
I replaced a fuel line as one was missing, and a P/Steering hose, hooked a battery up to it and put some gas in the tank as it was bone dry. Turned the key and fuel poured out from under the rear. Replaced another fuel line and tried again. This time fuel poured out from around the top of the inlet mainfold. I pulled it apart and replaced a few O rings. Tried it again and it started!! Ran smoothly after a few seconds.
Ill take it for a run up the road tomorrow to see how it drives :)
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
-
- Enthusiast
- Posts: 607
- Joined: Fri Nov 16, 2007 3:50 pm
- Location: Oregon, USA
- Contact:
Sick mate :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
- panda
- Enthusiast
- Posts: 680
- Joined: Fri Apr 18, 2008 2:56 pm
- Location: Mount Gambier, South Australia
and the old school "scorpion" steering wheel.
Dreams have no limits.
1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
- perrinsohc
- Mine is bigger than yours
- Posts: 315
- Joined: Sat Mar 20, 2010 4:53 pm
- Location: Sydney/Christchurch
The front seats are early starion ones. Im going to retrim the rear to match.
Yeah it was on Trade Me. $1 res. Got it far cheaper than I thought it was going to sell for.
Might start fixing the rust this weekend :)
Yeah it was on Trade Me. $1 res. Got it far cheaper than I thought it was going to sell for.
Might start fixing the rust this weekend :)
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
Will its been over a year since Ive updated this so thought Id through up some pics.
Ive fixed the rust and had the repairs painted. It was at the painters for over 6 months!! I didnt really have the room for it anyway lol And to be fair I did tell the guy I wasnt in a hurry for it....
Ive also lowered it with compressed springs. Its going to need new shocks in the back and either new shorter inserts in the front or just shorten the factory ones.
Before
The day after I removed the springs it snowed.
After
Its not as low in the front as I was hoping for but it should settle a little with use.
I dont really have the time for this car, so may sell it as is. Anyone interested? Would make a very different drift car lol
Ive fixed the rust and had the repairs painted. It was at the painters for over 6 months!! I didnt really have the room for it anyway lol And to be fair I did tell the guy I wasnt in a hurry for it....
Ive also lowered it with compressed springs. Its going to need new shocks in the back and either new shorter inserts in the front or just shorten the factory ones.
Before
The day after I removed the springs it snowed.
After
Its not as low in the front as I was hoping for but it should settle a little with use.
I dont really have the time for this car, so may sell it as is. Anyone interested? Would make a very different drift car lol
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
-
- Enthusiast
- Posts: 605
- Joined: Thu Apr 06, 2006 2:21 pm
- Location: Christchurch,New Zealand
loving the white crew cut rofl
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
Yip, haven't had it re-regoed yet. Just had rust in the roof where the roof rack screwed on and in the bottoms of both front doors. All sorted now tho.kiwieurospec wrote:Still de reg? Was rust found in any critical areas?
Don't need yet another Mitsi but txt or pm what you're after.
Can you txt me. I changed my phone and dont think I have your number anymore
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
Ignoring my question? roflJAS wrote:Yip, haven't had it re-regoed yet. Just had rust in the roof where the roof rack screwed on and in the bottoms of both front doors. All sorted now tho.kiwieurospec wrote:Still de reg? Was rust found in any critical areas?
Don't need yet another Mitsi but txt or pm what you're after.
Can you txt me. I changed my phone and dont think I have your number anymore
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
rofl
Sorry mate. :P
No thanks. Dont think the sigma would be the best for racing anyway...
Sorry mate. :P
No thanks. Dont think the sigma would be the best for racing anyway...
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
Who is online
Users browsing this forum: No registered users and 27 guests