Shaitz... i just passed 500 posts...
Not even a 10th of your's redzone... :beer
Turbo setup Issue. JA vs JD Turbo. BOV vs Plugged.
-
- I like starions
- Posts: 125
- Joined: Thu Dec 29, 2011 3:10 pm
- Location: Port Macquarie NSW AUS
Funny, I was actually just about to post some questions about the boost!redzone wrote:3" dump pipe makes them spool quicker, the stock dump is uber restrictive..
TC05's can be ok if u wind the boost up.
I plan to use a manual boost controller to raise my boost but I wanted afew things and I felt it was better to ask here in this thread then a new one.
like this boost controller:
http://www.carmodsaustralia.com.au/gfb- ... oller-3001
Whats the stock boost?
What is a safe boost the 1983 4g63t JA can handle? 14psi to much?
Also, I remember reading something about a boost cut or fuel cut or something with the ECU and boosting it... I cannot remember what I read.. Is that a concern or will a GFB Atomic Boost Controller work?
P.s. someone check out my other post if able;
http://forums.austarion.com/viewtopic.php?t=14523
Work on Car, Go to Gym, Pump Bitches = Life
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
yeah pretty much, but this guy wants to use stuff he has lying around..
cheers fugazi, my post count is SCARY lol :beer
cheers fugazi, my post count is SCARY lol :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
As I've changed over my TC05 (JD type) to a TC06 (JA type but water-cooled) I suppose I should comment...
With the TC06, I added a bigger compressor wheel (17C) and a 3 inch dump, BUT the thing has too much lag before it gets going and when it does,
you're 4000rpm + and then the rush hits in. Great for the race track I suppose.
I think for the street, the TC05 is better and response down low will be more noticeable. As previously mentioned, increase boost to just under 1 bar(~12lbs)
and install hi-flo dump with a decent exhaust. With the intercooler installed it should allow enough condensed air/fuel to keep up with turbo...
I'd go for the JD turbo and enjoy the low down response! Just don't expect too much of a rush after 5000rpm!
:beer
With the TC06, I added a bigger compressor wheel (17C) and a 3 inch dump, BUT the thing has too much lag before it gets going and when it does,
you're 4000rpm + and then the rush hits in. Great for the race track I suppose.
I think for the street, the TC05 is better and response down low will be more noticeable. As previously mentioned, increase boost to just under 1 bar(~12lbs)
and install hi-flo dump with a decent exhaust. With the intercooler installed it should allow enough condensed air/fuel to keep up with turbo...
I'd go for the JD turbo and enjoy the low down response! Just don't expect too much of a rush after 5000rpm!
:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
ooooohhhhh
Hi BRUZMAN ,
oh and Mal -JDSTAZ45! try a JD turbo with a HKS rally cam
Ooowesome :D :D :D :beer thats what i have in mine !!
oh and Mal -JDSTAZ45! try a JD turbo with a HKS rally cam
Ooowesome :D :D :D :beer thats what i have in mine !!
STARSPEED
86 COLTSPEED JD STARION ( my baby )
2000 MITSUBISHI CHALLENGER LS 4X4 ( daily driver )
2010 KIA SORRENTO R ( family car )
83 stebercraft 475 DF - 70hp johnson ( my toy )
86 COLTSPEED JD STARION ( my baby )
2000 MITSUBISHI CHALLENGER LS 4X4 ( daily driver )
2010 KIA SORRENTO R ( family car )
83 stebercraft 475 DF - 70hp johnson ( my toy )
Who is online
Users browsing this forum: No registered users and 11 guests