WTD Axle shaft (4 bolt)

Chipp · Post by **Chipp** » Sat Oct 08, 2011 7:55 pm

I am trying to locate a Axle shaft for my starion as I have managed to sheer the one in mine.

Any assistance would be greatly appreciated.

Chipp

Lummy · Post by **Lummy** » Sat Oct 08, 2011 8:07 pm

They're generally referred to as "half shafts" or "drive shafts".

You must have some decent power to have sheared one? I put around 350rw HP through mine and have never had an issue.

I have a couple here if you get desperate, but I'm in Vic, so you'll be better off grabbing one off someone local. I wouldn't think they're worth much, just make sure the universal joints are ok when you find one.

Chipp · Post by **Chipp** » Sat Oct 08, 2011 9:16 pm

Hi Lummy

Its not the half shaft its actually the axle shaft inside the stub axle assembly. The rally car and locked Diff decided to chew it up and spit out.

enthuzed · Post by **enthuzed** » Sun Oct 09, 2011 12:05 am

Can help you there Chipp, which side do you want or do you want a matching set? Im down south too.

OLD FART · Post by **OLD FART** » Sun Oct 09, 2011 5:25 am

Lummy wrote:They're generally referred to as "half shafts" or "drive shafts".

just make sure the universal joints are ok when you find one.

You mean the cv = constant velocity joints. :)

starionc · Post by **starionc** » Sun Oct 09, 2011 2:18 pm

enthuzed wrote:Can help you there Chipp, which side do you want or do you want a matching set? Im down south too.

Aren't they both the same?

Chipp. I have a few in Penrith if your up for a drive. Bring pics of your rally car!!!! and have a look over mine!

Cheers Jason

enthuzed · Post by **enthuzed** » Sun Oct 09, 2011 2:35 pm

starionc wrote:
enthuzed wrote:Can help you there Chipp, which side do you want or do you want a matching set? Im down south too.
Aren't they both the same?

Cheers Jason

Yep. I'm asking whether he wants one or a pair. :)

John196701 · Post by **John196701** » Sun Oct 09, 2011 4:26 pm

Chipp

who did the spool for the locked diff

Chipp · Post by **Chipp** » Mon Oct 10, 2011 9:14 pm

Thanks everyone for the feedback

StarionC I have sent PM and would definitely bring pics.

John196701 I am not sure as this was done when I bought the car.

Cheers Everyone

Austarion

WTD Axle shaft (4 bolt)

WTD Axle shaft (4 bolt)

Who is online