WTB: the impossible: Good JB door trims

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

WTB: the impossible: Good JB door trims

Post by robert26t »

As the subject reads;

Im after a good set of JB door trims obviously to suit JB. Color doesnt phase me too much. Im preferably after something in the Syd region.

Any heap would be greatly appreciated. I want to get my car on the road, its taking too long!!!

I dont mind even if it comes with a complete car at the right price.

Cheers,
Rob.
starionc
I love starions
Posts: 479
Joined: Wed Sep 14, 2005 11:50 am
Location: sydney
Contact:

Post by starionc »

Hmmmmm interesting! (looks at spare shell in shed).................
How many Starions can one man drive!!

Check out my website: www.aboutstumpgrinding.com.au
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

starionc wrote:Hmmmmm interesting! (looks at spare shell in shed).................
They would wanna be good trims!

You should be keeping that shell though
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

I might actually have some in my JB in good nick! It's a track car so was gonna be stripped out, I'll have a look. They're that horrible burgundy/dark red co our though, does that bother you? Also I'm in Melbourne, but know a cheap shipping company. I'll check em out today!
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

Perfect. I have the maroon interior!.

Let me know.
Cheers
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Excellent! Well I'll take some photos photos for you and if you're happy with them I'd be happy with $100 (which would include me posting them to you) since I wasn't going to use them anyway.
I'll try and get the photos tomorrow. May take me slightly longer to get them out of the car though cos it's parked in tight in my workshop between two cars and behind another. But I'll keep you posted.
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

awesome, thanks!.
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

Otherwise, I have several sets of burgundy door trims.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

I'm chasing a really good rh trim burgundy top!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

I'm chasing a RH burgundy bottom at a minimum.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Ok, so I got into the car and got the photos. The trims are in really pretty good condition, except for the fabric over the speaker, and except for one other real shame- the arm rests have indent marks on them where the roll bars were pressing against them. See the photos below. Let me know if these are still good for you or not. Otherwise perhaps NachoMan may have some better ones.

Passenger side. See the speaker cover fabric, and also indent from roll bar:
Image

Close up of the indent:
Image

Drivers side (can see roll bar that makes the indent):
Image

Let me know if you still want them.

Cheers!
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

To the best of your knowledge do you think the indents will come back out over time??
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

I'll be 100% honest and say, no, I don't think the indents will fully come out unfortunately. It looks a bit like it's compressed the material behind it, and also the metal has stained the red where the indent is. But the indent seemed very solidly impressed into. Quite a shame really. Bit of a tighter fit that I had thought.

So yeh, you may be better with something else out there, but these are available if you're still keen. They won't be going anywhere in any hurry (unless someone else desperately tries to buy them I guess).
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
paradox
I like starions
Posts: 113
Joined: Sun Mar 01, 2009 8:43 pm
Location: Tasmania

Post by paradox »

just thinking theres something i know that may be able to get the stain out, if you can get your hands on "AutoSmart - Brisk" good stuff for the vinal and the only thing i've tried that removes that stuff without dammaging the material.
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

Thanks for that.

Im still keen.. though whats yours like nachoMan? and are you able to ship?

Obviously I need better then what I already have and im not sure if those would be better?

cheers!
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests