2.6L 4G54B recommendations

All technical questions and answers regarding starions, being modifications to maintenance.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

2.6L 4G54B recommendations

Post by NXTIME »

Looking to start collecting engine parts for a decent power upgrade. What would those experienced 2.6L guys suggest for:

- cam
- head mods
- bottom end
- de-stroking pros/cons?

and I won't be pussyfooting around :wink:

Already have most of the bolt ons, so now want to start on the internals.
Last edited by NXTIME on Thu Sep 15, 2011 11:13 pm, edited 1 time in total.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Stock cam is best, most usa guys use them in high power street builds.

Magna head, maybe try a m9 closed chamber one would be a good experiment plus they dont crack easy like the m6 m7's.

Wiseco or JE I think do off the shelf forged pistons.

destroke, personally I wouldn't, u dont want to rev these things too hard..
Last edited by redzone on Sun Sep 04, 2011 8:33 pm, edited 1 time in total.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

My 10 sec gk gsr had wiesco slugs and ridgecrest h beams, m9 head, camtech custom grind & rams port/valve job.

Balance shafts were removed & capacity came in at a little over 2.6.
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Have heard that there is a chain tensioner mod that keeps tension or takes up the slack in the chain until the oil pressure tensioner can do it's job.
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Late model 2.6 block & tensioner maybe
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

have you considered swapping the 2.6 in the staz for the one in the gtr?

it would be yet another nissan powered staz :twisted:
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

No, I have a 3L 6G72TT for that ;)

Thanks for the info so far guys.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

Post by tri26t »

yep M6/7/9 heads are good then you come to the block and I dont know how
most of you guys see G54s but Ive never had a block that didnt crack or warp, seems when I put over 25psi in them the head studs on the exhaust side would pull the threads out of the blocks or the blocks would crack between the 1st and 2nd welsh plugs (EXHAUST side)
I used the 296 deg solid cam from the states and it was good over 5700rpm
to 7050rpm and always use a late Magna oil pump.

http://www.cardomain.com/ride/760629/19 ... shi-triton

cheers:Phil.
TORQUES-CHEAP.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

Phil, What about the M8 heads?

Are the late model Magna oil pumps the same as the OEM turbo ones sold by DAD on SQC?

Who makes the 296 cam in the US?

I have had Camtech in Aus reccommended to me by a couple of people.
Last edited by NXTIME on Thu Sep 15, 2011 9:50 pm, edited 1 time in total.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

NXTIME wrote: I have had Camtech in Aus reccommended to me by a couple of people.
The camtech is essentially a copy of someone elses.

Like the 4G ones are copies of the Kelfords & BC cams.
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

yep...was after specs and possibly custom grind recommendations since I havent played with G54's before
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
bulldogger
Lil' Dorifto
Posts: 48
Joined: Sat Apr 30, 2011 11:18 pm
Location: sydney

Post by bulldogger »

i have part numbers for crower rods,fidanza flywheel,wiseco pistons etc if you want
i had it all about a yr ago and sold it to guy in the act check through my link you see my old la and above parts


http://rides.webshots.com/album/5786314 ... es&start=0
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

Post by tri26t »

NXTIME wrote:Phil, What about the M8 heads?

Are the late model Magna oil pumps the same as the OEM turbo ones sold by DAD on SQC?

Who makes the 296 cam in the US?

I have had Camtech in Aus reccommended to me by a couple of people.
M8 head I used must have been an over heated one as it cracked real quick
between valves but still it was a great head. I used the late Magna oil pumps
and nothing else so I never had a delivery problem they were all Oem pumps -Idle 55psi and over 1100 rpm 85psi. the cams are Schneider...

http://schneidercams.com/hydraulicfollo ... fts-2.aspx

the only thing I had to use, longer tappit adjusters (4mm longer nissan ?)
and that put the tappet a little off center of the valve head on full lift.
I still have a set of Hydrolic DELWEST nascar valves and dogdicks I never
used (not selling) dont know if you can still get them....

http://www.delwestengineering.com/SpringRetainers

I dont think starion g54 BLOCKs C R A C K at all, so I would be using that
Ive never heard anyone say they have cracked one ????

Cheers Phil.
TORQUES-CHEAP.
User avatar
cheaterparts
I love starions
Posts: 351
Joined: Mon Sep 27, 2004 7:36 pm
Location: melbourne aust

Post by cheaterparts »

OLD FART wrote:Have heard that there is a chain tensioner mod that keeps tension or takes up the slack in the chain until the oil pressure tensioner can do it's job.
I always fit a spacer behind the tentioner plunger its easy to measure while dialing the cam in and the front cover is off

when removing the head the cam sprocket will still sit on its resting spot
but when refitted on the cam to spacer stops the tenioner going back before the oil presure builds up

by the way I do this on a NA motor that has 3.5 mm removed from the head and some off the deck as well
cheater

2.6 sigma IPRA spec

projects
E21 323 JPS bimmer
type 7 clone sports car
MainstreaM
I've been here before
Posts: 201
Joined: Sat Nov 20, 2004 7:04 pm
Location: USA
Contact:

Post by MainstreaM »

Since you guys have the brake booster on the other side, I would suggest the Magna head and TR intake. I wanted to use the TR in one of my cars but I would have had to eliminate the brake booster completely for it to fit. Also Schneider makes a good cam and matching uprated valve springs. Get some stainless oversize valves as well. The G54 responds very well to opening up the airflow. There are some custom cams to use with roller rockers, TimC on starquestclub makes them, lots of guys have had good luck with his stuff. HKS made a real good cam for the G54B once upon a time, but good luck finding one. ARP makes head studs which is a good upgrade for big boost.

Kane
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests