WTB: Cheap car! in Brisbane or Sydney
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
WTB: Cheap car! in Brisbane or Sydney
Hey gents,
I will be over in Brisbane August the 23rd and heading to Sydney to see family beginning of September.
I would like to purchase a $1000-2000 car (hopefully road legal) not long after I get to Australia. I would prefer to find one in Brisbane but if something is available in Sydney I could purchase there and drive back to Brisbane. I was hoping to find one in Brisbane before I head to Sydney so I could drive to Sydney and have a bit of a road trip along the way.
At this stage I'm after whatever I can get - with my budget I suppose I can't be too picky, so long as it's somewhat presentable and has/or could easily obtain a RWC. Don't mind something with a few issues as I'm a bit handy like that, but the price must obviously reflect that.
Would prefer Mitsubishi as it's the language I speak, something along the lines of an HH/HG Galant (or even HJ if they are nearly as cheap) or even a smelly Magna. Have a preference to mid-sized vehicles around 2.0-3.0L in capacity and 5spd manual preferred but could make do with an automagic. I am open to any alternatives however.
Please let me know if you know of anything!
Thanking you all muchly,
Phil
I will be over in Brisbane August the 23rd and heading to Sydney to see family beginning of September.
I would like to purchase a $1000-2000 car (hopefully road legal) not long after I get to Australia. I would prefer to find one in Brisbane but if something is available in Sydney I could purchase there and drive back to Brisbane. I was hoping to find one in Brisbane before I head to Sydney so I could drive to Sydney and have a bit of a road trip along the way.
At this stage I'm after whatever I can get - with my budget I suppose I can't be too picky, so long as it's somewhat presentable and has/or could easily obtain a RWC. Don't mind something with a few issues as I'm a bit handy like that, but the price must obviously reflect that.
Would prefer Mitsubishi as it's the language I speak, something along the lines of an HH/HG Galant (or even HJ if they are nearly as cheap) or even a smelly Magna. Have a preference to mid-sized vehicles around 2.0-3.0L in capacity and 5spd manual preferred but could make do with an automagic. I am open to any alternatives however.
Please let me know if you know of anything!
Thanking you all muchly,
Phil
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
thanks for that mate if you could keep an eye out that would be awesome!
Yeah I guess HG/HH or even HJ Galants aren't so common over there as they were here. At one time the late 80s the Galant was the only car to ever out-sell a Toyota Corolla in the small-medium size class. Then we had the flood gates of used imports opened up in the early 90s and a crapload more of them came here too. They may not be the best car today, but I've had so many of them I feel I know them inside out just about, and they've always proved to be reliable for me.
If I were going to move to Australia permanently I would look at bringing my VR-4 over with me, should be easy-ish to register there.... the Eterna on the other hand...
Yeah I guess HG/HH or even HJ Galants aren't so common over there as they were here. At one time the late 80s the Galant was the only car to ever out-sell a Toyota Corolla in the small-medium size class. Then we had the flood gates of used imports opened up in the early 90s and a crapload more of them came here too. They may not be the best car today, but I've had so many of them I feel I know them inside out just about, and they've always proved to be reliable for me.
If I were going to move to Australia permanently I would look at bringing my VR-4 over with me, should be easy-ish to register there.... the Eterna on the other hand...
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
If u could handle something older, my flatmate has a 83 sigma 2.6 auto that he'd sell for only a few hundred bucks,i can investigate what it needs for rwc if u like?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
that would be perfect! I don't mind something older, and I would be just as familiar with an 83 Sigma as I would an HG/HH/HJ Galant. I was aiming towards something 90ish for good fuel economy/safety etc but a Sigma will be good enough for a temp car.redzone wrote:If u could handle something older, my flatmate has a 83 sigma 2.6 auto that he'd sell for only a few hundred bucks,i can investigate what it needs for rwc if u like?
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
3spd auto wouldnt be something i'd drive to sydney though lol, but i'll have a chat to him & maybe get some pics organised..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Awww, come on.redzone wrote:3spd auto wouldnt be something i'd drive to sydney though lol, but i'll have a chat to him & maybe get some pics organised..
I have done it with a 2 spd!!!!!
The Forum Parts Guy
www.vibrantperformance.com for all your performance fabrication needs
IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car
Here to run out of your life & take all your money!
www.vibrantperformance.com for all your performance fabrication needs
IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car
Here to run out of your life & take all your money!
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
if it's only going to be a few hundred bucks plus not too much work to get a RWC, then beggars can't really be choosers can they? :P
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
yeah then you can spend the rest of that 2k budget on fuel getting to sydney rofl
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
Re wheels
My recent trip from Sydney to Townsville was 2385Klms (coast Rd) and $850 in 6 tanks over 2 days!
But that was in my truck with my grinder on the back. Almost 6 tone!
Cheers Jason
But that was in my truck with my grinder on the back. Almost 6 tone!
Cheers Jason
Who is online
Users browsing this forum: No registered users and 49 guests