FS(NZ): Parting '87 Starion GSR-V - being crushed in 3 days!

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

FS(NZ): Parting '87 Starion GSR-V - being crushed in 3 days!

Post by dirtygalant »

Hey guys, just picked up a parts car, pretty much already all in pieces.

It is a 1987 JDM Starion GSR-V with the Sirius DASH engine. More or less complete apart from the hatch glass which has been smashed. It is white in colour however patches have been painted silver. The body is quite rusty and the plates are de-registered. I will be sending the body to the scrap yard early-mid next week if you want body specific parts let me know ASAP.

Other than that, it has two sets of doors, two sets of front guards, two bonnets - one vented and one not vented. Front windscreen is there and intact. All door glass and rear window glass (apart from hatch).

Engine is the G63B DASH 3x2, however I will be keeping this for myself along with the associated wiring loom, AFM, ECU (though I do have one or two other DASH ECUs available) and turbo. The gearbox will be up for grabs but probably not the rear end and diff, even though it doesn't appear to be an LSD unit (axles spin opposite way.. WTF??)

The interior is dark blue cloth and from what I could see of it, it isn't in bad condition. Has a 7000rpm redline gauge cluster but that's already spoken for at this stage.

I am after expressions of interest for whatever parts, I'm not out to attract big dollars for items as I would prefer them to go to good homes rather than the scrap yard! BUT I need to know preferably before the end of the weekend, as the shell will be taken to the scrap yard with all the unsold bits inside that I can't store in my own garage!

Will get pics up ASAP.

I am in Hamilton, New Zealand.

Either PM me, e-mail me at phil <at> philsparts <dot> co <dot> nz or call/txt me 022 604 2185.

Thanks!
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Get on it guys (& Tamgesic)!
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

Smaller things like JD style fog lamps, pillar vents, misc interior parts etc I can send to Australia (or even further)!
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Re: FS(NZ): Parting '87 Starion GSR-V - being crushed in 3 d

Post by JDSTAZ45 »

dirtygalant wrote: Engine is the G63B DASH 3x2, however I will be keeping this for myself along with the associated wiring loom, AFM, ECU (though I do have one or two other DASH ECUs available) and turbo. The gearbox will be up for grabs but probably not the rear end and diff, even though it doesn't appear to be an LSD unit (axles spin opposite way.. WTF??)

The interior is dark blue cloth and from what I could see of it, it isn't in bad condition. Has a 7000rpm redline gauge cluster but that's already spoken for at this stage.

I am after expressions of interest for whatever parts, I'm not out to attract big dollars for items as I would prefer them to go to good homes rather than the scrap yard! BUT I need to know preferably before the end of the weekend, as the shell will be taken to the scrap yard with all the unsold bits inside that I can't store in my own garage!
Will get pics up ASAP.
Can you please get those protection moulds around the panels of the car. I will need the LHS rear quarter. I'm not fussed if you sell the entire set complete!
Can you also supply me the p/s pump, working or not!
It might be a good idea to keep the p/s components/extra thermo fan at front/and of course the 5 stud setup!
Sounds like it's one of those no-frills GSR-V's with no LSD!! Does it have rear ABS and climate control?

:beer Mal
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

pics! turns out it was the spare hatch which had smashed glass, the original hatch with plastic hatch top spoiler is in good condition.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The boot of my RVR is full of crap too, including the TD05-12, DASH inlet mani, second set of headlamp mechanisms with motors, oil cooler, intercooler, tail lamps (JB style) etc which I have yet to unload into my garage yet.

I am not going to be able to store any of these parts other than the engine, some suspension items, maybe one of the two gearboxes and other bits and bobs - so all the rest like the doors, guards, bonnets, interior plastics, hatch, front and rear struts etc NEED to sell otherwise they will be scrapped along with the rest of the car!

Yet more pics coming tomorrow when I further clean things up and organise them. The car is still sitting in a mates garage across the other side of town at the moment.

SPEAK NOW OR FOREVER HOLD YOUR PEACE!!
Last edited by dirtygalant on Sat Jun 04, 2011 1:30 pm, edited 1 time in total.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Re: FS(NZ): Parting '87 Starion GSR-V - being crushed in 3 d

Post by dirtygalant »

JDSTAZ45 wrote:
dirtygalant wrote: Engine is the G63B DASH 3x2, however I will be keeping this for myself along with the associated wiring loom, AFM, ECU (though I do have one or two other DASH ECUs available) and turbo. The gearbox will be up for grabs but probably not the rear end and diff, even though it doesn't appear to be an LSD unit (axles spin opposite way.. WTF??)

The interior is dark blue cloth and from what I could see of it, it isn't in bad condition. Has a 7000rpm redline gauge cluster but that's already spoken for at this stage.

I am after expressions of interest for whatever parts, I'm not out to attract big dollars for items as I would prefer them to go to good homes rather than the scrap yard! BUT I need to know preferably before the end of the weekend, as the shell will be taken to the scrap yard with all the unsold bits inside that I can't store in my own garage!
Will get pics up ASAP.
Can you please get those protection moulds around the panels of the car. I will need the LHS rear quarter. I'm not fussed if you sell the entire set complete!
Can you also supply me the p/s pump, working or not!
It might be a good idea to keep the p/s components/extra thermo fan at front/and of course the 5 stud setup!
Sounds like it's one of those no-frills GSR-V's with no LSD!! Does it have rear ABS and climate control?

:beer Mal
Hi Mal!

No ABS and no climate control, so must be the no-frills version!

Yes you are right I perhaps would be keeping the P/S system as spares for mine, am definitely keeping the 5 stud setup and the dual electric fan radiator.

If it has the trim strip in the pics then it's yours mate! If it's not attached it may be inside the car somewhere - I have yet to go through everything and sort it out.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

does this have the window switches in the doors? if so what cond and how much $???
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

Yep has the door switches - when I looked at them they were in good condition. $30 for both of them for you Alex :D
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

sweet I'll take em. pm me bank details and total cost with shipping in there, sorry to keep asking mate just desperate for some
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Whats the dash like? If its in good condition Ill be keen.
Also if you end up using just the 5 stud hubs off the front, Id like the stub axles. Just cut them off the bottom of the struts. Just thinking ahead incase I get some D2 coilovers :)

Oh does it have the coat hooks in the back? They screw on the inside of the B pillars.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

Pm'd :D
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Jase if u buy anything i can pick it up in a few wks when i see phil if ya like
Image
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

Is there any demand for the leadlights complete with motors/mechanisms, as well as the complete factory front mount intercooler with piping? how about oil cooler with lines?
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

depends how much you want for them, could be keen
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Also, if the centre plastic console is available, I will take it. The person who tuned my car, crushed the original and so I have a maroon one amongst the dark plastics....
It's lightweight, so it shouldn't cost much to post??
Anyway, let us know if you're ok with this. Thx!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests