Clean... Still no polish

Display your ride and post power figures, dyno runs, drag and circuit times.
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

spanks
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

loojks great mate I agree though, smaller wheels and a three piece rear wing will really set it off, paint etc looks first class, great job.
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Mick,

I really would like to see a one piece rubber spoiler on that + decal!
The 3 piece spoilers on the narrowbodies look a tad messy/overdone/American...

Your thoughts on the rubber?? :wink: Spoiler that is!!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

if you feel that way about the 3 piece, you can always take it off your gsrv and send it to me.
:beer
Image
PIZZA DELIVERY GUY....No more
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

wow i didnt know that was such interest in these wings...
as i said, once its lower i'll look at the spoiler option... a tidy one piece lip could look ok?
thanks for the comments :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Less is moore!
I think she really looks awesome without wing.
And the 3-piece would be too much in my opinion.
A tiny one like the old BMW M5 maby?
Image
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

good call mate less is always more :beer
even a bob tail like the BA falcons have in the DJR320 model here.
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
tmz_99
Harmful or fatal if swallowed
Posts: 1582
Joined: Fri Sep 26, 2003 1:50 am
Location: Perth
Contact:

Post by tmz_99 »

one of the tidiest starions in a while.. :) love it.. :P
---------
TVR T350C
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

thanks pal, you havent been on here in a while? or just not posting :)
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
User avatar
perrinsohc
Mine is bigger than yours
Posts: 315
Joined: Sat Mar 20, 2010 4:53 pm
Location: Sydney/Christchurch

Post by perrinsohc »

With that much dish, you have the permission to do what ever you want lol
Image


87 Starion EX
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

i do have a few car crimes in mind :) not.

who knew there was so much room under those little guards?
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

Nice car!!
JDSTAZ45 wrote:a tad messy/overdone/American...
LMAO... coming from an Australian, that sounds ironic.

-Robert
Image
Now: Australian Compatible!
User avatar
jwebb2876
I've been here before
Posts: 248
Joined: Wed Sep 03, 2008 10:53 am
Location: parkes

Post by jwebb2876 »

Wheels are about 2" too big for my liking, but other than that it looks good :)
"Speed isn't everything; you gotta look cool on the touge too."- Keiichi Tsuchiya
gj2600.wordpress.com
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

Appreciate the feedback guys, if a decent offer on the wheels is made i'll definately be going back to 18's, they're a nice wheel but too much trouble with a bodykit, standard pumped guards would be spot on, like the one they came off LOL

Robert how is it that you enjoy any narrow body given that you live among wideys? :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

Why not covert to 5 stud? It will open up your wheels choices.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests