GSR-V Restoration
-
- Enthusiast
- Posts: 607
- Joined: Fri Nov 16, 2007 3:50 pm
- Location: Oregon, USA
- Contact:
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
-
- Austarion Occupant
- Posts: 3578
- Joined: Tue Apr 06, 2004 1:21 pm
- Location: Melborno
- Contact:
Like the green concrete! Going italiano Mal?TOMSUN wrote:Mal, get yourself a new camera! The colour in those pics don't to the car justice. :beer
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
I plan on using the SHP 8inch +18 for the fronts. I will try the 7inch widey wheels to see how they look though as I have a couple in good nic.
I really don't understand how a 9" SHP wheel 0 offset fits a flatty but not a 8" with -10 offset??
The 9" wheel should stick out 1/2inch from the one shown, but the 8" -10 should stick out 10mm further out. But in reality, the 8" (-10) sticks outside the guard and the 9 " doesn't.
Can someone please explain??
And for the conquest taillights, I really like the look of them. The red blinker lense is just cleared and the clear globe is replaced with an orange one!
The Euro look is not my cup of tea!
I really don't understand how a 9" SHP wheel 0 offset fits a flatty but not a 8" with -10 offset??
The 9" wheel should stick out 1/2inch from the one shown, but the 8" -10 should stick out 10mm further out. But in reality, the 8" (-10) sticks outside the guard and the 9 " doesn't.
Can someone please explain??
And for the conquest taillights, I really like the look of them. The red blinker lense is just cleared and the clear globe is replaced with an orange one!
The Euro look is not my cup of tea!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
There should be a 2.7mm difference in the backspacing of the wheels (9" 0 offset sticks out 2.7mm more than the 8" -10)
So I don't get it myself, Mal.
So I don't get it myself, Mal.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
I've got all variations on the widey wheels now...
the 7"+18, 8"+18(SHP front), 8"+0 (Jap. rears) 8" -10(US + Euro rears) and 9" +0 (SHP rears)
When I get time I will do a compaison with pics and see whether the wheels fit under the guard!
But it has been documented on the forum that the 8" -10 stick outsde the guard and the 9" sit flush! :? ???
the 7"+18, 8"+18(SHP front), 8"+0 (Jap. rears) 8" -10(US + Euro rears) and 9" +0 (SHP rears)
When I get time I will do a compaison with pics and see whether the wheels fit under the guard!
But it has been documented on the forum that the 8" -10 stick outsde the guard and the 9" sit flush! :? ???
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
:oJDSTAZ45 wrote:I've got all variations on the widey wheels now...
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
Who is online
Users browsing this forum: No registered users and 3 guests