Redzone's tassie trip!

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Redzone's tassie trip!

Post by redzone »

Hi guys, mum and i are heading to the Longford Revival this weekend, on behalf of dad, we are staying in Launceston and will be flying down tomorrow, coming home monday afternoon. we'll be at Longford most of the time, but if you'd like to catch up over the weekend, send me a pm and i'll give you my mobile number :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

Make sure to allow plenty of time to check out all of the old race memoriabilia in the Longford pub. I was there a few years back & spent 3 hours there & didn't even have a drink. I was fascinated by the photo of an old Ford Customline stuck in a house lounge room window after crashing on a corner of the track. Of course there's heaps of old Tasman stuff.

I'm sure you will enjoy it.

panda.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
avandull
Mine is bigger than yours
Posts: 346
Joined: Thu Aug 12, 2004 4:49 pm
Location: Hobart

Post by avandull »

See you there.
Agatha the ugly Starion
avandull
Mine is bigger than yours
Posts: 346
Joined: Thu Aug 12, 2004 4:49 pm
Location: Hobart

Post by avandull »

Well I didn't get to the pub, but I got a photo of Redzone in front of a Starion that was on display

Image

There were cars brought in from Europe. Longford used to be a big international track, so cars came from all over the world.

Image

Image

Image

Image

Image

Image

Image

Image

Image
I saw this on my way home. His ramp was trying to escape. I got him to pull over.
Agatha the ugly Starion
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Is the green one on the right of the blue GT a D-type? :drool:
Image
User avatar
jk
Mine is bigger than yours
Posts: 317
Joined: Sat Apr 18, 2009 10:22 pm
Location: SOR Perth WA

Post by jk »

fugazi wrote:Is the green one on the right of the blue GT a D-type? :drool:
No fugazi, I think it's the dart :)

You very lucky lads, some real dream machines there.

Is that the (ex?) Nachoman GSRV?
jb - white outside maroon inside
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Nope it was a freshly imported late type GSR-2 owned by an ian ingles, i kept an eye out all weekend but i never was able to catch up with the guy..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

hey dave ian lives way down south and bought my old shell as a project but didnt seem overly fussed about getting involved with the forum.
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
JA83
Mine is bigger than yours
Posts: 291
Joined: Tue Aug 18, 2009 6:11 pm
Location: hobart tasmania

Post by JA83 »

redzone wrote:Nope it was a freshly imported late type GSR-2 owned by an ian ingles, i kept an eye out all weekend but i never was able to catch up with the guy..
top fella he is, works as a mechanic at auto rent hertz from memory, that car is absolutly mint, JD auto turbo, like brand new.
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

redzone wrote:Nope it was a freshly imported late type GSR-2 owned by an ian ingles, i kept an eye out all weekend but i never was able to catch up with the guy..
GSR-2? :wtf:
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

Sweet pics. Looks like a fun event!!

-Robert
Image
Now: Australian Compatible!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah it sure was, here's a public link to my facebook album:

http://www.facebook.com/album.php?aid=2 ... 77da645277
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 99 guests