WTB Sydney Air intake

starionc · Post by **starionc** » Wed Feb 23, 2011 6:13 pm

Does anyone have or know where I can get an intake for a JA with a TC06 to fit a pod filter? Going on a rally car so needs to be strong more so then pretty rofl

Cheers Jason

panda · Post by **panda** » Fri Feb 25, 2011 1:17 pm

Jason, thats makes 2 of us. Any more for a GB ?

panda

enthuzed · Post by **enthuzed** » Fri Feb 25, 2011 4:25 pm

Make one.
Or try a Ford F150 one, Redzone reckons they're a direct fit.

starionc · Post by **starionc** » Wed Mar 02, 2011 7:11 pm

I made one today with 2 parts from auto-barn and a length of 3 inch pipe.

panda the part number for the silicone bend is D1-SH455176 It is a Drift hose and fits the tco6 at 2 inch and has a 45* bend that then flairs out to 3 inch. You need to cut the small end a bit to fit behind the power steering pump! Then the pipe and then the pod!

SAAS part number SF-595130CBT
It's a cleanable one and with the silicone hose and the recharge kit it cost $98. The pipe was an off cut and cost nothing!!!

I have sent pics to Rob so that he can put them up for me in the other post.

http://forums.austarion.com/viewtopic.php?t=13633

I hope this helps mate. :beer :beer

redzone · Post by **redzone** » Wed Mar 02, 2011 10:13 pm

enthuzed wrote:Make one.
Or try a Ford F150 one, Redzone reckons they're a direct fit.

ummmm no i dont, what it was, is that i use a small section from a 6 cyl early 80's F250 lower radiator hose to repair the stock starion intake pipe when they crack... nothing to do with fitting a pod!

enthuzed · Post by **enthuzed** » Wed Mar 02, 2011 11:34 pm

Okay, got that a bit wrong :roll: *slinks away quietly towards the dunce corner*

panda · Post by **panda** » Thu Mar 03, 2011 8:53 am

thanks starionc for that info, I will follow that up.

Austarion

WTB Sydney Air intake

WTB Sydney Air intake

Air intake

Who is online