bell houseing to suit RX7 box 4 sale

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Sargeant_Khan wrote:i've had funny sounds before, turned out to be smushed and broken throw out bearings.
That would be too good to be true if if was a TOB but TOB & SB are only working when the clutch pedal is depressed so while the noise mostly dissapears when the clutch is disengaged
Thrash the car is not at my home so can't start it up to refresh my memory of what it sounds like.
I have decided to hang onto the BH untill I work out which box i am going to use
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

G'day Rad,

Sorry for late posting, just picked up on this thread.

I am running the W58 and have had no drama at all except for a crappy (ie sloppy) gear change which had more to do with the lever mechanism than the box. I bought a short shifter for about 400 from NZ off fleabay and that fixed that issue right up. Now I have short, sharp and crisp changes and never a hint of a missed 2-3 shift. Just push it forward and keep going LOL .

At the end of the day mate, all I can say is the W58 has given absolutely no dramas and is untouched after a lot of k's in a road car and no doubt copped some abuse from the previous owners. I am pretty easy on boxes and always heel/toe or double clutch and not into skids and step off starts. I imagine you would be the same :beer
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

excuse my noobish ignorance.. what's a step off start?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

clutch dump
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

WANTSOM wrote:G'day Rad,

Sorry for late posting, just picked up on this thread.

I am running the W58 and have had no drama at all except for a crappy (ie sloppy) gear change which had more to do with the lever mechanism than the box. I bought a short shifter for about 400 from NZ off fleabay and that fixed that issue right up. Now I have short, sharp and crisp changes and never a hint of a missed 2-3 shift. Just push it forward and keep going LOL .

At the end of the day mate, all I can say is the W58 has given absolutely no dramas and is untouched after a lot of k's in a road car and no doubt copped some abuse from the previous owners. I am pretty easy on boxes and always heel/toe or double clutch and not into skids and step off starts. I imagine you would be the same :beer
Greg you know I don't do skidzs or donuts like the kiddzs and drive like a nana LOL but yes have been DDCing since 17 and just starting to shave off the bumfluff
Was wondering if the tunnel had to be "massaged "at all to fit the w58 ???
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

No massaging Rad to the tunnel it fits in but you will need to fabricate a new crossmember for the g'box (can mod the existing one to fit). Also get the longest selector shaft extension you can to get the gear lever as far back in the car as possible.

Cheers mate
Greg
Never argue with an idiot, it brings you down to their level and they beat you with experience.
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Thanks Greg still hopeing it's not the box
Hope to know more when the box is out hopefully nxt week
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

oldie, with the W58, there are some issues as well if you want the speedo connected - not sure if Greg has his speedo connected?

for mine, the guys cut a whole through the cross member and ran the speedo cable through the hole. Otherwise you can get a 90 degree extension for the speedo output on the gearbox - according to Redzone, the isuzzu/holden piazza ones are the go, but good luck finding one of those :)

Also, my speedo is either 7% or 14% off.. i forget which one.. but this can be corrected with a ratio box or different tyre diameters :) and of course you'll have the same issue with the fc box, so this isn't really a deciding factor at all.
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Post Reply

Who is online

Users browsing this forum: No registered users and 41 guests