bell houseing to suit RX7 box 4 sale

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

bell houseing to suit RX7 box 4 sale

Post by OLD FART »

I have the bellhouseing to suit the SERIES 4/5 RX7 box swap in excellent condition for sale $300.00 + post
Note they are hard to find and the last one i sold was gone in 3 hours :D so lets see how long it lasts this time
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

not going the rx7 box anymore oldie?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

thrash wrote:not going the rx7 box anymore oldie?
I'M torn between the rx and supra box and am getting conflicting info on which is strongest as I don't want to go the wrong way
A ny informed info would be helpfull
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

R154 = strong

W58 - marginally stronger than a starion box

FC RX7 - good enough 8000rpm launches & 9.7's on slicks before snapping OUTPUT shaft!!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

The few fc boxes, i've driven with have been a real pos to drive with. But as David has said before, there are alot of after market parts for them and they are very cheap. I'd consider an rx7 box if it would suit my engine and everyone you would find had been thrashed by its previous owner. I have never driven a car with a nicer feeling shift than a toyota. But it would be nice to get some kind of figures here?
:beer
Image
PIZZA DELIVERY GUY....No more
4gpwr
I love starions
Posts: 350
Joined: Tue May 20, 2008 5:15 pm
Location: sth east melb

box

Post by 4gpwr »

Dunno about rx7 boxes , why do most of the mazda guys put supra boxes in . I know of one guy that broke 6 rx7 turbo boxes this year . Now he has a supra box in it , he tells me he babys third gear but hasnt broke it yet
4Gs Rule
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

can't comment on the rx-7 boxes. both the w58 and the r154 feel really good to drive with.

only issue i have with the w58 in my car is that the gear lever is too long.. if i have something plugged into the cigarrette lighter, it wil hit my hand on occasion.. i need a short shifter, but since the trd ones are 400 bucks, i'll wait a bit longer before getting one :shock:
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

I remember reading somewhere that the 154 was like changing gears in a truck. As long as you slam it in it works well...
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

gearbox upgrade is a common mod at ausrotary.com. But the rx7 box is probably the cheapest/easiest/best mod for a wideblock starion looking to put out hp's. Cheap bellhousing Rad goodluck with sale. :beer
Image
PIZZA DELIVERY GUY....No more
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Sargeant_Khan wrote:The few fc boxes, i've driven with have been a real pos to drive with. But as David has said before, there are alot of after market parts for them and they are very cheap. I'd consider an rx7 box if it would suit my engine and everyone you would find had been thrashed by its previous owner. I have never driven a car with a nicer feeling shift than a toyota. But it would be nice to get some kind of figures here?
:beer
what about them was bad to drive? i've never driven a shit one..

Rotary guys using supra boxes are usually fitting R154 yes?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

Mostly getting gears for me. Crunchy like corn flakes. Tremec and toyota r series, but a w series is not uncommon.
:beer
Image
PIZZA DELIVERY GUY....No more
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

enthuzed wrote:I remember reading somewhere that the 154 was like changing gears in a truck. As long as you slam it in it works well...
very untrue.. i've driven a couple with hardcore clutches and some of them had short shifters as well - all were happily changing with the force of two fingers, even with the shorter throws.
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

I love to read various opinions and hopefully make the best decision if and when my box is out and find the reason for the noises is diagnosed. Hopefully it's the clutch and not the box fingers xx but not holding my breath :)
Greg what do you have in your track weapon and your experience with it ???
opinions/experience anyone else with either box in their hi powered cars would be helpfull as well :)
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

what noises are coming from your current setup oldie?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

i've had funny sounds before, turned out to be smushed and broken throw out bearings.
Image
PIZZA DELIVERY GUY....No more
Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests