Who has a 5 stud narrow and is looking for pimp wheels?

[NXTIME]

Mal needs 6 bolt spindles and axles...price for those, Dave?

[JDSTAZ45]

they bolt to flatty rear axles?
That red flatty looks very nice and similar to Mals GSR-V.
interesting rear wing too

yes. the splines on the rear spindles are the same as long as you dont get the 6 bolt type spindles, you just use the early (ie aussie) 4 bolt flange on the new USA 86/87 widey rear spindles and it all bolts together..

i reckon mal should buy these works for the GSR-V, they're spot on and a suitable colour!!!!

I agree, they are nice wheels and would suit colour & size wise perfectly, but overall not the look I'm after! Freshened up widey wheels is what I decided on.

I am still not sure whether the axles on early starions suit the later widey spindles as the holes do not exactly match up. A little drilling to match is required I think.
But Yes, the splines do match up!! I think 'Jas' can shed more light on this....

Yeah, I got a 6 bolt LSD and can only use it on a widey, hence I wouldn't mind 6 bolt spindle/hub and axles.

:beer

[thrash]

mal.. you really need to post up pictures of this rocking horse that you own. you know, the one that leaves all this rocking horse shit in your shed for you? rofl

[redzone]

I am still not sure whether the axles on early starions suit the later widey spindles as the holes do not exactly match up. A little drilling to match is required I think.
But Yes, the splines do match up!! I think 'Jas' can shed more light on this....

Yeah, I got a 6 bolt LSD and can only use it on a widey, hence I wouldn't mind 6 bolt spindle/hub and axles.

:beer

the only part that doesnt fit from the 86/87 widey rear spindles is the 4 bolt flange which you chuck in the bin as yes the bolt pattern is slightly different, and use the aussie/early type 4 bolt flange that matches your half shafts..

which is what i posted on the previous page, i have done this a few times now...

i dont have any 6 bolt stuff spare anymore as i sold it a while back.. 6 bolt stuff you dont need spare of as it's indestructible!

[JDSTAZ45]

the only part that doesnt fit from the 86/87 widey rear spindles is the 4 bolt flange which you chuck in the bin as yes the bolt pattern is slightly different, and use the aussie/early type 4 bolt flange that matches your half shafts..

which is what i posted on the previous page, i have done this a few times now...

i dont have any 6 bolt stuff spare anymore as i sold it a while back.. 6 bolt stuff you dont need spare of as it's indestructible!

I get it now with the way it's applied to the aussie axles!!

The 6 bolt hubs and axles are wanted just in case I want to throw on the GSR-V or any other 4 stud staz!! :beer

[NXTIME]

What's a widey (1988/89) diff worth these days?

[redzone]

if it's complete, assembled and known to be quiet and the lsd's good you've gotta get $1000 for it...