How much for MPI conversion

All technical questions and answers regarding starions, being modifications to maintenance.
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

How much for MPI conversion

Post by Vulpes »

Yes Mal you read that correctly, im bored and thinking about doing multi point on my staz in the 12 months or so. Any ideas these days on the cost of manifold, injectors, ECU, tuning ( can u get an off the shelf program these days ? ) also would be looking at upgrading the turbo and installing my intercooler and a water injection kit.
What increase in power could i expect and could I get it done for $5,000 ?
Remembering Im very handy with a spanner and can do all the mechanical work myself. Anyone wanting to sell any of the parts listed above ?
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

is this suitable ?

Post by Vulpes »

http://cgi.ebay.com.au/Motec-ECU-wiring ... 19c10ffd5e

bearing in mind im not after huge hp or advanced tuning abilities. what is a good ecu these days ? microtech ? haltech ? what are people using ?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yes you could do it for under $5K, and that'd be paying someone to do it. wouldnt include the turbo upgrade though.

I have an L300 MPI manifold here for sale mate :)

Get a Haltech sprint 500 ecu for $1099, they're awesome value for money, or an EMS stinger, or Wolf V4X.

i'd stay away from microtech, i've had customers with reliability issues. and that old motec is ok for a historic racecar but you wouldnt use it on a car you'd drive everyday as the fuel economy would be shocking (i owned a fuel only version of that 1993 ecu).

plenty of info on here how to do the mpi conversion. and get a TD05H16G from MRB1 on here as a turbo upgrade, i think it'd be right up your alley :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

dont waste your time with SOHC MPI just go straight to DOHC MPI either do a 4g63 or SR20

but if your heart is set on SOHC MPI

L300 manifold - cause you can then keep your cooler piping setup

and 2nd hand haltech ECU should do it!

ps. i have a haltech E6K/ignitors/coils/etc... for sale!

http://forums.austarion.com/viewtopic.php?t=13377
SR20 powered starion what have I done..... :P
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

got an l300 manifold as well if interested, plus 550cc injectors to go with it.. plus a range of intercoolers if required.. plus high rpm double valve springs too :twisted:

http://forums.austarion.com/viewtopic.php?t=13113
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

I have a full setup inc Sonata manifold and ECU.......... no longer required and happy to sell.

Cheers :)
1985 JB - owned from new.
1986 JD - used to own one.......
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

holy shit its the mpi "spam yo parts" thread now LOL LOL LOL
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

is that the one i sent your way noddy?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Lol at Dave, yes Vulpes feel free to select whatever you desire from the MPI buffet...
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

:o now i dont know which way to go. First of all there is NO WAY I am going the twin cam route, after reading all the hassles involved with AC mounting points, thermostat relocations etc etc. Besides from what I understand there is no way you would get it for under 10k done properly.
PM's sent for the parts thanks guys.
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

redzone wrote:
get a TD05H16G from MRB1 on here as a turbo upgrade, i think it'd be right up your alley :)
Who is this turbo from and how do I contact said person ?
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Easy Vulpes, it's an Evo3 big 16g turbo, 505cfm at 15psi & rated @ approx 375hp @ 22psi. Contact Mark at http://www.gtpumps.com.au/. More info specifically Starion related here: http://starion.mrbdesign.com.au/
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
bluestarion
Lil' Dorifto
Posts: 43
Joined: Mon Feb 09, 2004 11:13 pm
Location: Tasmania Hobart
Contact:

Starion MPI

Post by bluestarion »

I agree that you will need to put aside 3-5k for the project.
For the CPU go Autronic. Its a bit more expensive than Haltech (and others) but reliable as hell. It is also limited in the type of transducers it will accept (this can be a good thing).
Motec has a better user interface and supports a larger range of transducers however is more expensive.
Go the L300 option as most of the plumbing can stay the same.
CA18DET or similar/larger are fine for most applications.

I have an L300 with Autronic currently on my car. If you are ever in Tas feel free to pop round for a sticky beak. Hell for that sort of money I would consider selling you the car :)

Matt
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
hoongirl
Ace Girl Retraction
Posts: 1144
Joined: Thu Jan 08, 2004 2:18 pm
Location: Sydney
Contact:

Post by hoongirl »

Next cruise you should take my car for a quick spin to see how a mpi single cam feels. :beer
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

wouldnt he know that already seeing it was his car before LOL
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests