Blow off noise..
Blow off noise..
after fitting the new radiator and finding that the car was running rough i thought that a run around the block might fix the rough idle ( caused by dirty fuel sitting there). Half way around my little circuit i decided to open the car up. It started to cough and splutter and then all of a sudden came on boost and rocked :D , changed gears and got the whooosh noise of a blow off. Now i know my car doesn't have one bar the factory one.
Could it be something to do with the radiator/cooling system working properly?? or is it more a manifold leak? this has me puzzled as the noise wasn't there when the old ratted radiator was in there.. i reakon i was lucky not to cook the turbo or the head!!!!
any help would be appreciated
drew :D
Could it be something to do with the radiator/cooling system working properly?? or is it more a manifold leak? this has me puzzled as the noise wasn't there when the old ratted radiator was in there.. i reakon i was lucky not to cook the turbo or the head!!!!
any help would be appreciated
drew :D
- el schmicko detailer -
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Ive found the more you open up the intake, the louder turbo noises get.
By simply cutting my air can, my old turbo's turbo-whine almost doubled in volume.
Id say you are getting compressor surge which sounds similar to a BOV except its more of a fast flutter than a loud PSSST. Id agree with above and say you have quite a large leak somewhere. It will be on the compressor side.
By simply cutting my air can, my old turbo's turbo-whine almost doubled in volume.
Id say you are getting compressor surge which sounds similar to a BOV except its more of a fast flutter than a loud PSSST. Id agree with above and say you have quite a large leak somewhere. It will be on the compressor side.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
yeh when i first fitted my cooler i hadnt had time to fit the BOV....got a very nice turb flutter...lol sounded like a hks sequential...lol...but its not to good for the compressor...
Valiant VJ E55 Charger
Valiant VK E57 Wagon
Valiant VF VIP 318 Fireball
Valiant VF-X hemi
Mitsubishi JA Starion
---------- THE MOPAR MAN ----------
Valiant VK E57 Wagon
Valiant VF VIP 318 Fireball
Valiant VF-X hemi
Mitsubishi JA Starion
---------- THE MOPAR MAN ----------
-
- I like starions
- Posts: 132
- Joined: Sat Jan 10, 2004 4:28 pm
- Location: Adelaide - the sleeper state
Yeah mine has pretty loud turbo spool up noise now that it got the wastgate fixed and the turbo kicks in right on 2000rpm (silly tdo4). Im also running a pod filter so that would be making a bit of induction noise.
Makes alot more noise and bov goes of alot more now.
The noise your probably hearing if you don't have a bov is what prozac said, the air reversing in you intake pipe and going back against the turbo compressor wheel.
My car does it very loudly if i dissconect and clamp the vac hose to my bov. Also test drove a vr4 cordia that had a tdo4 and small intercooler piping but no bov and this also did it rather noticibly.
Makes alot more noise and bov goes of alot more now.
The noise your probably hearing if you don't have a bov is what prozac said, the air reversing in you intake pipe and going back against the turbo compressor wheel.
My car does it very loudly if i dissconect and clamp the vac hose to my bov. Also test drove a vr4 cordia that had a tdo4 and small intercooler piping but no bov and this also did it rather noticibly.
well the culprit was the induction pipe :D clearly broken all the way through! there was the noise and leak. it still puzzles me that this noise only appeared after the cooling system had been replaced. i have wrapped the intake piping with thermal wrap for the time being, i will be making the new induction pipe a priority. I have just started my 2 weeks holidays to get some work done on the car.
keep you posted on the new induction piping. I'm guessing that it's kinda going to look like a intercooler pipe, without the cooler ( for the time being ).
thanks for all your help everyone...
:beer
keep you posted on the new induction piping. I'm guessing that it's kinda going to look like a intercooler pipe, without the cooler ( for the time being ).
thanks for all your help everyone...
:beer
- el schmicko detailer -
-
- almost postwhore
- Posts: 1015
- Joined: Sat Jan 10, 2004 12:02 pm
- Location: Ballarat, Victoria, Australia
- Contact:
Who is online
Users browsing this forum: No registered users and 39 guests