alternator?! you prick.

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

alternator?! you prick.

Post by madeofmilo »

hi everyone.
My battery isn't charging. Not a particularly difficult problem I'm sure. battery = 12.7V car not running.
battery = 10.3V car running.

before pulling out the alternator is there anything else I should check?
If we agree it's the alternator then how do I get it out?

cheers Dave
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

Prick ? Dave, the alternator is easy to get out. there are basically two bolts you need to undo. the first one is up top and it sits in a long arched backet with a long slot in it that you use to tension the alternator with. the next one you need to undo is a very long bolt at the back down low, this holds it to the block. I cant recall if the alternator belt is the first one off the rank or not so you may need to pull another belt off first to get to it if you are changing the belt as well. cheers.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Biggest thing to remember is to undo the negative battery terminal first, or you could let the smoke out if something hits something it's not supposed to..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Adriano
I've been here before
Posts: 236
Joined: Wed Oct 04, 2006 3:21 pm
Location: Sydney

Post by Adriano »

Check the alternator fuseable link first, its in the fuse box next to the battery
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

hi guys, started taking it out today.
The bottom bolt (the one holding it to the block) doesn't seem to be the standard one. It has a square head and no matter what I do i can't get it to turn.

Any help?
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

That is the standard bolt!

Undo it from the other end (nut) and tap it out.
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Lummy wrote:That is the standard bolt!

Undo it from the other end (nut) and tap it out.
There is a long app 50 mm nut on the other end of that bolt .The square front of the long bolt is locked in between castings to stop it turning
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

I took all the bolts etc off. Now it's loose but can't get it out because of it's size. Do you remove the thermo fan?


I suddendly remember why I am an electrician and not a mechanic. This stuff shits me.
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
User avatar
deejaylg
[P] Plater austaz
Posts: 22
Joined: Tue Dec 22, 2009 9:56 pm
Location: Veresegyház, Hungary

Post by deejaylg »

try to rotate it, and you will be happy. You don't have to remove the fan
'86 Mistubishi Starion 2.0T
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Hi madeofmilo!
I notice you're in Melbourne's east.
I am also in Melbourne, north-east, if you like I don't mind dropping by with a Starion to compare alternators and perhaps give you a hand. I will be out the East side on Monday coming if you have the day off as well for Melb cup.

Anyway let me know how you go.

My number is 0413 781 764 if you're keen.
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

Hi mate. That sounds good. Around mid-morning and lunch. Will give you a call tomorrow to tee it up. If you drink beer and play pool then you and I are going to be buddies.

Cheers Dave.
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
JA83
Mine is bigger than yours
Posts: 291
Joined: Tue Aug 18, 2009 6:11 pm
Location: hobart tasmania

Post by JA83 »

i replaced my alterantor not long ago, remove the thermo fan and it will come out nicely... most of all DONT STRESS
User avatar
Xentro
Mine is bigger than yours
Posts: 307
Joined: Mon Jan 12, 2004 11:20 pm
Location: Holland

Post by Xentro »

I had to take take out all the bolts of the airfilter box to create enough room to take out the alternator.
-------------------------------------------
83 2000EX runner.
88 2.0 Black Widebody DOHC evo 6 turbo at 1.7 bar
88 2.6 White Widebody. spun a bearing.
06 2.0 Lancer Wagon. daily driver.
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Cool, beer and pool are both great things!
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Gimme a yell if you're still wanting me to take a look at tomorrow. Altho I'm realising there's probly nothing I can tell you about it that you don't already know. From the description it definitely sounds dead. But yeh I'm happy to take a look anyway. All I would really be able to do is measure the output straight from it but it seems pretty conclusive, and with it out of the vehicle I'm not even much use with that.
See wot u think.
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests