who runs a GT30?

MR Bender · Post by **MR Bender** » Sun Sep 26, 2010 9:28 pm

hello

does anyone run a GT30 on the twincams?

if so when does it hit full boost/ spool up at what RPM?l

im thinking of trying one on my car to see how they go.
as i run a gt35r and just after something a little less laggy.

any tips?

greenstaz82 · Post by **greenstaz82** » Sun Sep 26, 2010 10:44 pm

im running a gt3040 with the .63 rear housing on a 2.3 twincam , it all starts happening around the 4 k mark .

OLD FART · Post by **OLD FART** » Mon Sep 27, 2010 5:11 am

Mr B you can change the turbine to a smaller one to improve spoolup/boost earlier

OLD FART · Post by **OLD FART** » Mon Sep 27, 2010 5:13 am

greenstaz82 wrote:im running a gt3040 with the .63 rear housing on a 2.3 twincam , it all starts happening around the 4 k mark .

Hey Todd good to hear you have the stroker up and running .Don't you just love the torque ??

redzone · Post by **redzone** » Mon Sep 27, 2010 7:57 pm

bender, what turbine housing are you running? try a .63?

MR Bender · Post by **MR Bender** » Mon Sep 27, 2010 9:20 pm

i think it a .82 .
does the GT35R come with a 63?

redzone · Post by **redzone** » Mon Sep 27, 2010 10:10 pm

yep u can get a .63 rear housing for a couple of hundred $$, or you might find someone on a forum willing to swap for your .82.

it will make a big difference mate if you have a .82 now.

MR Bender · Post by **MR Bender** » Mon Sep 27, 2010 10:32 pm

any good places i can buy them from?

4gpwr · Post by **4gpwr** » Tue Sep 28, 2010 8:01 am

I got a 3 bolt 3540 .63 turbiune housing , doing nothing .

Website · Post by **WidebodyWoody** » Tue Sep 28, 2010 10:20 am

My GT35 Turbo has a smaller rear housing and wheel. Its actually a Evo style exhaust housing, and the smaller wheel helps it spool up much sooner. I highly recommend it. :beer I believe its a .63 rear, but don't quote me on that part...

redzone · Post by **redzone** » Tue Sep 28, 2010 7:28 pm

Yours isnt a GT35 woody, it's a GT2876R.........

greenstaz82 · Post by **greenstaz82** » Tue Sep 28, 2010 9:09 pm

OLD FART wrote:
greenstaz82 wrote:im running a gt3040 with the .63 rear housing on a 2.3 twincam , it all starts happening around the 4 k mark .
Hey Todd good to hear you have the stroker up and running .Don't you just love the torque ??

yeh its pretty sweet , goin in for a tune next week , made good power on a run in tune , lookin forward to the final results .

Website · Post by **WidebodyWoody** » Wed Sep 29, 2010 9:29 am

redzone wrote:Yours isnt a GT35 woody, it's a GT2876R.........

Really? I paid for a GT35RLS and I know I didn't get what I paid for. But Millenium motorsport checked it out and said the front half was a GT35 but the rear wasn't. If it is a GT2876R.... I don't mind, would be nice to know the exact model I got. :beer

redzone · Post by **redzone** » Wed Sep 29, 2010 11:14 pm

Did they pull it apart to check? GT35R and GT2876R have the same .7 AR front cover, different inducer size though.

i remember looking at your rear housing and seeing a T25 pattern..

Website · Post by **WidebodyWoody** » Thu Sep 30, 2010 9:34 am

Will have to check it out, but honestly I don't want something the size of a GT35 total. I prefer the low down torque then for the full boost to come on after 4-5k.

Thanks for the info Dave

Austarion

who runs a GT30?

who runs a GT30?

exh

Who is online