HELP please: mitsubishi L300 Conversion distributor parts?
- bluestarion
- Lil' Dorifto
- Posts: 43
- Joined: Mon Feb 09, 2004 11:13 pm
- Location: Tasmania Hobart
- Contact:
HELP please: mitsubishi L300 Conversion distributor parts?
Hi Guys,
I did an L300 multipoint conversion some time ago. I used an optical type distributor from a DASH engine (I think - over 9 years ago).
Anywho I need to replace the rotor and cap but for the life of me can't find a replacement part.
The details I have are:
Rotor Cap T48372
Rotor - T205
Pic shows what it looks like.
Show Image:
Any help would be greatly appreciated.
Cheers
Matthew
I did an L300 multipoint conversion some time ago. I used an optical type distributor from a DASH engine (I think - over 9 years ago).
Anywho I need to replace the rotor and cap but for the life of me can't find a replacement part.
The details I have are:
Rotor Cap T48372
Rotor - T205
Pic shows what it looks like.
Show Image:
Any help would be greatly appreciated.
Cheers
Matthew
Last edited by bluestarion on Fri Apr 02, 2010 10:01 am, edited 1 time in total.
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
- bluestarion
- Lil' Dorifto
- Posts: 43
- Joined: Mon Feb 09, 2004 11:13 pm
- Location: Tasmania Hobart
- Contact:
Stock Starion Dizzy
Maybe the perspective is a bit misleading.
I can confirm it is not a stock starion dizzy. The rotor cap is about 1/3 of the height of stock and it has an optical pick up.
But you are right about the clips on the DASH engine.
I am stuffed if I know where it's from then? I have had look in the Bosch books and there are a few that look similar based on a Mitsubishi ignition but in a Ford/Mazda.
I can take some more pics if that helps?
Desperate
Matthew
I can confirm it is not a stock starion dizzy. The rotor cap is about 1/3 of the height of stock and it has an optical pick up.
But you are right about the clips on the DASH engine.
I am stuffed if I know where it's from then? I have had look in the Bosch books and there are a few that look similar based on a Mitsubishi ignition but in a Ford/Mazda.
I can take some more pics if that helps?
Desperate
Matthew
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
- bluestarion
- Lil' Dorifto
- Posts: 43
- Joined: Mon Feb 09, 2004 11:13 pm
- Location: Tasmania Hobart
- Contact:
Does anyone have an idea what this is?
Please - does anyone have any idea where this distributor comes from?
Cheers
Matthew
Cheers
Matthew
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
-
- my mangina paid for my staz
- Posts: 2129
- Joined: Thu Jan 15, 2004 1:23 pm
- Location: Brisbane
I had a similar dizzy in my gold car, i believe its from a L300. For the dizzy cap you can still use a stock starion dizzy cap. Doesnt matter if its optical or not. For the rotor, i've used both the smaller one and the larger one in my dash dizzy without a problem.
Just to confirm here is a pic of the two rotor caps you mention with one being 1/3 of the size of the other.
Just to confirm here is a pic of the two rotor caps you mention with one being 1/3 of the size of the other.
- bluestarion
- Lil' Dorifto
- Posts: 43
- Joined: Mon Feb 09, 2004 11:13 pm
- Location: Tasmania Hobart
- Contact:
I think this is it
Thanks for the reply.
By chance I came across this on ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0381866653
Was struggling to find the rotor and cap on the Bosch catalog though.....
Cheers
Matthew
By chance I came across this on ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0381866653
Was struggling to find the rotor and cap on the Bosch catalog though.....
Cheers
Matthew
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
there are two different types of stock 2L starion dissy's, plus the 2 wiring connector differences within the JA series..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
IM glad you found them Matthew as I am about to put the l300 optical dizzy into my Starion soon and although Ive been told its in good condition [ which im sure it is ..at the moment ] I would say i would have had to replace it sometime in future and I would not be wanting to replace with my spare stock Starion one as it changes the type of system I want to run .
Ill be bookmarking that one
Cheers
Ill be bookmarking that one
Cheers
Umbrella girls rock. That is all
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
So that one on eBay, which says its for Mitsubishi Galant HH 4G63 SOHC 1990-1992 2.0L also fits the Starion eh? Didn't know that.
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
- bluestarion
- Lil' Dorifto
- Posts: 43
- Joined: Mon Feb 09, 2004 11:13 pm
- Location: Tasmania Hobart
- Contact:
Found the replacement parts
Hi Guys,
Found the replacement parts for the rotor and cap:
Fuel Miser
JP718 - Dist Cap $22
JR641 - Rotor $18
JR806 - Rotor $32 (mitsu)
I have ordered both rotors just to be safe and will post a reply once I have confirmed.
Cheers
Matthew
Found the replacement parts for the rotor and cap:
Fuel Miser
JP718 - Dist Cap $22
JR641 - Rotor $18
JR806 - Rotor $32 (mitsu)
I have ordered both rotors just to be safe and will post a reply once I have confirmed.
Cheers
Matthew
I wonder why I wonder why
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
I wonder why I wonder
I wonder why I wonder why I wonder why I wonder.
Who is online
Users browsing this forum: No registered users and 0 guests