A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
MR Bender
Enthusiast king
Posts: 754 Joined: Sun Nov 11, 2007 8:01 pmLocation: Perth Western Australia (SOR)
Post
by MR Bender Thu Mar 04, 2010 9:49 pm
iv never been it the top of 4th when i crossed the line (i think?)
Bite my shiny metal ass!!!
TOMSUN
Group buy King
Posts: 2391 Joined: Fri Sep 10, 2004 10:24 amLocation: Sydney (Liverpool)
Post
by TOMSUN Thu Mar 04, 2010 10:36 pm
MR Bender wrote: iv never been it the top of 4th when i crossed the line (i think?)
I was in top of 3rd gear.
1985 JB Starion #157
TOMSUN
Group buy King
Posts: 2391 Joined: Fri Sep 10, 2004 10:24 amLocation: Sydney (Liverpool)
Post
by TOMSUN Thu Mar 04, 2010 10:38 pm
fugazi wrote: TOMSUN wrote: thrash wrote: I've heard that ideally you should be at the top of the rpm range in 4th gear when crossing the finish? Is this true?
yes
Wouldn't that be close to 125mph (200km/h)?
That is for working out theoritical best gearing for drag racing. They aim to be at red line in 4th gear as they cross the line.
1985 JB Starion #157
Nosaki Faki
I like starions
Posts: 149 Joined: Wed Mar 12, 2008 8:08 pmLocation: Bendigo. Vic.
Post
by Nosaki Faki Fri Mar 05, 2010 8:49 am
TOMSUN wrote: fugazi wrote: TOMSUN wrote:
yes
Wouldn't that be close to 125mph (200km/h)?
That is for working out theoritical best gearing for drag racing. They aim to be at red line in 4th gear as they cross the line.
So 3.9-1 diff and 14s would be the best way to go ya rekon?
If at first you don't succeed, maybe skydiving just wasn't your sport!
NXTIME
Registry Nazi
Posts: 2972 Joined: Thu Jan 08, 2004 3:14 pmLocation: Sydney, NSW
Post
by NXTIME Tue Mar 09, 2010 1:37 pm
Pete, I have a pair of good used slicks that you can borrow'. 15 x 26 x 9's from memory...
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
TOMSUN
Group buy King
Posts: 2391 Joined: Fri Sep 10, 2004 10:24 amLocation: Sydney (Liverpool)
Post
by TOMSUN Tue Mar 09, 2010 3:05 pm
NXTIME wrote: Pete, I have a pair of good used slicks that you can borrow'. 15 x 26 x 9's from memory...
SWEET!
Are they on rims already?
1985 JB Starion #157
NXTIME
Registry Nazi
Posts: 2972 Joined: Thu Jan 08, 2004 3:14 pmLocation: Sydney, NSW
Post
by NXTIME Tue Mar 09, 2010 7:40 pm
Yes.....commondore rims though :D
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
NXTIME
Registry Nazi
Posts: 2972 Joined: Thu Jan 08, 2004 3:14 pmLocation: Sydney, NSW
Post
by NXTIME Tue Mar 09, 2010 7:42 pm
Alternatively, I also have 255/50/16 M/T ET Street Drag radials.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
jk
Mine is bigger than yours
Posts: 317 Joined: Sat Apr 18, 2009 10:22 pmLocation: SOR Perth WA
Post
by jk Wed Mar 10, 2010 12:00 am
In WA you aren't allowed to run slicks and radials together, you need to use proper cross ply front runners.
jb - white outside maroon inside
NXTIME
Registry Nazi
Posts: 2972 Joined: Thu Jan 08, 2004 3:14 pmLocation: Sydney, NSW
Post
by NXTIME Wed Mar 10, 2010 11:11 am
Under ANDRA rules, if your car runs quicker than 12.5 then you must use cross ply front tyres with slicks. And TOMSUN's car won't run those times...yet ;)
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Users browsing this forum: No registered users and 69 guests
