strengthening pans for km132

crshbndct · Post by **crshbndct** » Fri Mar 05, 2010 8:20 am

http://projectzerog.com/forum/viewtopic ... ght=#14654

hey. we are getting one of these, wondering if anyone wants to do a group buy, maybe get them cheaper, or save on shipping from teh us?

OLD FART · Post by **OLD FART** » Fri Mar 05, 2010 10:18 am

I imported 3 recently and they ended up costing $145.00 AUD each incl post
Paul is a straight shooter who ships via UPS and lets you know when they are sent & all the info needed for you to track where they are on the way. Perfect tight fit with everything you need right down to a new pan drain plug washer :D

Post by **Alspos** » Fri Mar 05, 2010 10:59 am

Pics?

OLD FART · Post by **OLD FART** » Fri Mar 05, 2010 1:07 pm

Alspos wrote:Pics?

They are on Zero G

Post by **Alspos** » Fri Mar 05, 2010 1:43 pm

OLD FART wrote:
Alspos wrote:Pics?
They are on Zero G

Not that I can see, perhaps they can only be seen by members?

OLD FART · Post by **OLD FART** » Fri Mar 05, 2010 5:20 pm

Al not a lot to see They are a app 18 -20 mm thick ally plate flat underside and the upper side is cnc'd out slightly to drain to the outlet Mine & Kits are in bolted up

JAS · Post by **JAS** » Fri Mar 05, 2010 5:38 pm

How much stronger do you guys think these will make the box case's??

fugazi · Post by **fugazi** » Fri Mar 05, 2010 5:42 pm

I'm sure this pan adds strength to the GB-housing... but what fucks up when something actually fucks up due to to much torque?
Is it the housing or something inside? Or both?

JAS · Post by **JAS** » Fri Mar 05, 2010 6:07 pm

fugazi wrote:I'm sure this pan adds strength to the GB-housing... but what fucks up when something actually fucks up due to to much torque?
Is it the housing or something inside? Or both?

I think its the housing twisting that kills the high powered ones. As apposed to old age in most other starions :)

fugazi · Post by **fugazi** » Fri Mar 05, 2010 6:46 pm

JAS wrote:
fugazi wrote:I'm sure this pan adds strength to the GB-housing... but what fucks up when something actually fucks up due to to much torque?
Is it the housing or something inside? Or both?
I think its the housing twisting that kills the high powered ones. As apposed to old age in most other starions :)

Well.. giving it some extra thought... if the housing isn't rigid enough the inner parts will be more stressed...

redzone · Post by **redzone** » Fri Mar 05, 2010 11:22 pm

the gears are too small in diameter thereby making the case try to spread apart under big power loads. the alloy pan was originally a ralliart option part (as was the 6 bolt diff), but ended up as a regular production part on the last starions (as was the 6 bolt diff).

Austarion

strengthening pans for km132

strengthening pans for km132

Who is online