CUSTOM EXHAUST MANIFOLD
- davidbek95
- I've been here before
- Posts: 249
- Joined: Thu Jan 08, 2004 7:59 pm
- Location: beautiful QLD (mackay)
CUSTOM EXHAUST MANIFOLD
IS IT WORTH PUTTING ON A CUSTOM EXHAUST MANIFOLD OR LEAVING IT WITH THE STANDARD MANIFOLD WITH A ADAPTOR PLATE FOR A DIFFERENT TURBO.
REGARDS DAVID
REGARDS DAVID
It depends on the design. Just because it is custom made doesn't automatically mean that it will make additional power/torque or decrease lag. I am still using the standard exhaust manifold, ported and with an adaptor flange welded onto it. The fairly large turbo I have bolted to it (54mm rear wheel, 60mm front) still spools up around the 2,500 mark and makes full boost by 4,000, with the tuning and cam needing attention.
David, I would reccomend that you fit the bigger cooler before you go to the expense of fitting a custom exhaust manifold. if and when you do decide to get an exhaust manifold made up, make sure that you go to someone who has made one for a Starion/Mitsu before and can ensure that you will reap some significant power gains from it.
Charlie.
David, I would reccomend that you fit the bigger cooler before you go to the expense of fitting a custom exhaust manifold. if and when you do decide to get an exhaust manifold made up, make sure that you go to someone who has made one for a Starion/Mitsu before and can ensure that you will reap some significant power gains from it.
Charlie.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
So where do we get these off-the-shelf, equal-length, really well made, and non-custom bolt-on Starion exhaust manifolds that will give a 20HP@wheels gain? :Dtoysrus wrote:Doesn't have to be custom made, just equal length and really well made.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
hahaha easy way to make 120hp prozac...
its just that i gota quote...750 for a custom tuned length manifold from a exhaust shop...not a bad price me thinks...an i suppose if it makes more hp its worth it no
its just that i gota quote...750 for a custom tuned length manifold from a exhaust shop...not a bad price me thinks...an i suppose if it makes more hp its worth it no
Valiant VJ E55 Charger
Valiant VK E57 Wagon
Valiant VF VIP 318 Fireball
Valiant VF-X hemi
Mitsubishi JA Starion
---------- THE MOPAR MAN ----------
Valiant VK E57 Wagon
Valiant VF VIP 318 Fireball
Valiant VF-X hemi
Mitsubishi JA Starion
---------- THE MOPAR MAN ----------
Who is online
Users browsing this forum: No registered users and 46 guests