My new Widey : BRUTUS

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

what would you like close ups of??
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

intercooler piping/radiator area - im undecided about how im going to do my intercooler setup just looking for ideas for the best way to go!
SR20 powered starion what have I done..... :P
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

WOULD YA BELIEVE THIS SUCKER RUNS! picked it up from the run in tune at the dyno today, just a few little fiddly jobs left to do and it'll be on the road.. and heading to gatton street sprints this year too hopefully, should be a good starion presence this year!








i took some pics a while back ix but they didnt come out very well.. spose u dont need them now anyway huh? LOL
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

ps the exhaust note is SERIOUSLY chubby inducing :)

i built a 3 inch mild steel mandrel bent system, with a catco metal cat, flex, small straight thru muffler mounted in the recess below driver's seat, and a xforce cannon same as mine on the back, mounted straight and tucked up as high as it would go...

it sounds angry, but not farty like it would without that centre muffler.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

All this taunting and no follow thru...where are the pics? Coming up fricken awesomely by the looks of previous photos.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

is the cat converter necessary for legal purposes?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

thrash wrote:is the cat converter necessary for legal purposes?

In Qld if the car came with a cat you can't delete it & if you replace the original motor with another type it must have a cat.My JB has been engineered and blue plated with the stroker,and all the twin cam mods :D
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

side question.. did JDs come with cats?

and i wonder if it's the same in nsw, since the further south you go, the more stringent the state rules..

what if the replacement motor didn't come with a cat? do you still need to fit one?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

thrash wrote:side question.. did JDs come with cats?
yes

thrash wrote:what if the replacement motor didn't come with a cat? do you still need to fit one?
no. Generally need to fit all emmissions equipment that were fitted to the car of new motors origin. Can't fit an engine that is older than the car (ie can't fit a 60's V8 to a Starion).
There are exceptions to the rules - state in Aus, and LPG, but that is the gist.
4G63 - 87kg
4G54 - 107kg
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

you can actually fit an older engine to a newer car, but you have to fit all the emissions equipment necessary to make it pass the requirements of the newer car..

pics soon. steve took a few today when he came up.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

what kind of figures bounced up on the run in tune?
Image
PIZZA DELIVERY GUY....No more
User avatar
BILTEL
Big Dorifto
Posts: 79
Joined: Sun Aug 28, 2005 6:52 pm
Location: Silverstone, UK

Post by BILTEL »

Yum Yum!! :drool:
Classic Touring Car racer

#20 Pre 93 touring cars
www.classictouringcars.com

RWD is for Heros, 4WD is for Zeros!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Sargeant_Khan wrote:what kind of figures bounced up on the run in tune?
150hp atw at 6 psi at 4500rpm, without doing ignition maps..

ps what do you want pics of enthuzed?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

I can't remember now, it's been too long. I'll have to re-read this thread!
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

redzone wrote:
Sargeant_Khan wrote:what kind of figures bounced up on the run in tune?
150hp atw at 6 psi at 4500rpm, without doing ignition maps..

ps what do you want pics of enthuzed?
I think it was the Intercooler Pipework and clearances? (We'll that was I was keen to see :D
1985 JB Starion #157
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests