FS: [NSW] JB Starion Number 100 – Sydney

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

What do you suspect has happened to the crank?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

enthuzed wrote:What do you suspect has happened to the crank?
Crank related troubles - full story can be found at:
http://forums.austarion.com/viewtopic.p ... sc&start=0

pictures of crank damaged can be found on page 3 of that thread. Basically, the keyway and key to hold the timing gear in place is worn.
redzone wrote:bodge up the crank with devcon like i suggested, that'll get you here. if it breaks down around the border i can always tow it from there :D

and yeah fuel's no drama.. so you keen or what? :pimp
if you pay the full 2 grand i'm happy to do it and include all the extras mentioned :P

btw, where can i get this devcon stuff from? The guy at repco went :wtf:
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

let me think about it for a couple of days man. but yeah i'm not surprised that repco dont know what devcon is. loctite do an equivalent thing too i'm pretty sure. i'll check for a part number for it at work, you might be able to teach the repco dude something rofl
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump again
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump bump
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

i need this car gone guys.. all offers will be considered
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump - price and details updated
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Ah, you meant this car...what MPI stuff were you throwing in?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

are you seriously interested?

in the hunt for 170kw, so far i've collected..

- choice of l300 manifold or modded sonata manifold
- ems ecu already tuned for said l300 manifold and 550cc injectors
- wiring loom to suit l300 mani and ems ecu - this will need to be redone as it is not in the best of shape.
- 550 cc injectors
- cam - unknown spec, but was in a car that made 200kw, and power to 7k rpm - no, it wasn't a starion
- double valve spings
- electronic dizzy
- newish spark plug leads
- custom exhaust manifold from flav for a 16g or 20g turbo - this is yet to arrive..
- vr4 intercooler, and some other intercoolers..

Not sure if I've forgotten stuff.. but this is what I can remember. I can't go and check for now cos it's all packed away due to the move. Noddy has already asked for the mpi gear, pending shipping costs, which I will have to work out as perth is faaar. So if he takes it first, then i will not be able to sell it with the car... for obvious reasons..

And not all of the stuff will be included.. e.g. I will only inlclude one of the intercoolers and one of the intake manifolds.. and i'm thinking of keeping the 550cc injectors.. but then I have 8 of them at the moment so hmmm.. i dunno..
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

final bump.

It'll go on ebay next week..

I wish i had the space to store it and fix it :(
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

still have this if anyone wants to buy it.. haven't put it on ebay yet.. a part of me doesn't want to let it go.. first starion and it's the 100th JB.. can't get a cooler number than that.. except maybe number 1..

but i don't have space.. so i should let it go.. rego runs out on the 9th of march..
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

thrash wrote:first starion and it's the 100th JB.. can't get a cooler number than that.. except maybe number 1..
ive got number 007 sitting in my garage :D
SR20 powered starion what have I done..... :P
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

haha I was just thinking about that one actually.. number 001.. number 007 and number 100.. all special lol was there a 000 or a 200?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

not sure if there was a 000 but im pretty sure that my one is the oldest starion in australia.
SR20 powered starion what have I done..... :P
Post Reply

Who is online

Users browsing this forum: No registered users and 64 guests