hi i want some bigger sway bars for the f+r of the JA.
who makes them?
who has used what brand?
what did you think of them?
Are they available?
ok go
aftermarket sway bars??? what brand
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Yes they are avaliable, they were whitline but are now selbys.
They are 22mm rear and 24mm front
Goto a good suspension centre they should have listings,I doubt pedders.
They are 22mm rear and 24mm front
Goto a good suspension centre they should have listings,I doubt pedders.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
-
- my mangina paid for my staz
- Posts: 2129
- Joined: Thu Jan 15, 2004 1:23 pm
- Location: Brisbane
Refer to this post for a contact detail "http://forums.austarion.com/viewtopic.php?t=10127, they are adjustable too. One of the best mods you can do for handling for the price.
Two sway bars front and rear.enthuzed wrote:What was the pic supposed to be Al?
It was an experiment I did a few years ago. If it's good enough for every RX3 on the planet, it's good enough for me :)
Worked very well too, you can adjust the rate by moving the end mounts along the bars. Made a big difference and all it cost me was some nolathane type material, a couple of hours and two stock sway bars.
I would say torsional rigidity increased but to what extent I don't know and can't measure. It was a lot stiffer than normal. Car sat pretty flat when cornering. When the rear bar was adjusted to max(?) it became very oversteery so I had to back it off.Junkers wrote:Jeepers. Does that equal double the effective width of the sway bars as a whole or double the torsional rigidity?
-
- Austarion Occupant
- Posts: 3578
- Joined: Tue Apr 06, 2004 1:21 pm
- Location: Melborno
- Contact:
Yeah, the pics didn't come out...
Error message when using "view picture" from Seamonkey/Firefox:
The image “http://www.fr33z3.net/starions/Apr06/fr.jpg” cannot be displayed, because it contains errors.
I imagine it's the same for Exploder users.
Error message when using "view picture" from Seamonkey/Firefox:
The image “http://www.fr33z3.net/starions/Apr06/fr.jpg” cannot be displayed, because it contains errors.
I imagine it's the same for Exploder users.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
nah, exploder users don't get warnings before the boom
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
Who is online
Users browsing this forum: No registered users and 9 guests