Good idea or Bad idea?

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
vr4gone
I like starions more
Posts: 187
Joined: Wed May 13, 2009 1:23 pm
Location: Western Australia

Good idea or Bad idea?

Post by vr4gone »

The rego (NSW) on my vr4 is expired now. There are too many mods done to it so I don't want to engineer it again for this state. Should I rail it over and put the running gear from it into my starion?
MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

Fast household appliance on wheels vs fast 80's throwback on wheels.

I don't really know what you mean by 'drivetrain' though. You don't have visions of a 4WD starion do you?
vr4gone
I like starions more
Posts: 187
Joined: Wed May 13, 2009 1:23 pm
Location: Western Australia

Post by vr4gone »

MrBishi wrote:Fast household appliance on wheels vs fast 80's throwback on wheels.

I don't really know what you mean by 'drivetrain' though. You don't have visions of a 4WD starion do you?
Actually yes they did make a factory 4WD Starion but Australia never got it and I'm not sure if it was an east/west or north/south but I was thinking of ust using the engine and what ever else I could. I'll do some research and find out.
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

if you want your probably best to pull out the motor and wiring harness/ECU and buy a dellow supra set up and be done with it and ull have a very fast starion!
SR20 powered starion what have I done..... :P
vr4gone
I like starions more
Posts: 187
Joined: Wed May 13, 2009 1:23 pm
Location: Western Australia

Post by vr4gone »

MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

We all know about the 4WD starions. I've seen one in the flesh. They are north-south orientation and has nothing in common drivetrain-wise with the VR4.

You realise that bolting in the VR4 motor will mean;
-Changing the starion gearbox or running an adapter plate
-Changing the VR4 accessory positions (A/C, P/S, alt etc)
-Altering the water outlet
-New exhaust dump pipe & I/C pipes.
-Modify inlet manifold t/b position
-Probably new exhaust manifold (depending on if you have a custom one in the VR4 that by some miracle fits in the Starion engine bay)
-11ty billion little things.

Now think about the stuff that may need upgrading on the starion to suit more powers. LSD, good brakes, suspension etc.

Go for gold!
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

It's all true, but it's worth it in the end!!

DO IT!
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

I'ld say just keep the VR-4 intact and go find a dud VR-4 engine to rob the DOHC parts from. No need to dismantle a perfectly good VR-4 just for the engine - as that's about all you'ld be able to use it from. I guess at least in Australia VR-4 parts would sell quite quickly.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

I agree with dirtygalant on this one.

Although I would love to see another DOHC in a staz, I wouldn't dismantle a perfectly good car for it.
vr4gone
I like starions more
Posts: 187
Joined: Wed May 13, 2009 1:23 pm
Location: Western Australia

Post by vr4gone »

Ok, so I can see people are divided. Well I think Starions are rarer than vr-4's and even though I miss the grip and v8 wooping performance of my vr-4, it's no two door sports car. If I sell it, I wouldn't get enough to cover a 1JZGTE conversion which I'd really like. Oh what to do :roll:
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

should easily get enough for a good VR4 to do a 1J conversion yourself...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests