Good idea or Bad idea?
-
- I like starions more
- Posts: 187
- Joined: Wed May 13, 2009 1:23 pm
- Location: Western Australia
Good idea or Bad idea?
The rego (NSW) on my vr4 is expired now. There are too many mods done to it so I don't want to engineer it again for this state. Should I rail it over and put the running gear from it into my starion?
-
- I like starions more
- Posts: 187
- Joined: Wed May 13, 2009 1:23 pm
- Location: Western Australia
Actually yes they did make a factory 4WD Starion but Australia never got it and I'm not sure if it was an east/west or north/south but I was thinking of ust using the engine and what ever else I could. I'll do some research and find out.MrBishi wrote:Fast household appliance on wheels vs fast 80's throwback on wheels.
I don't really know what you mean by 'drivetrain' though. You don't have visions of a 4WD starion do you?
-
- I like starions more
- Posts: 187
- Joined: Wed May 13, 2009 1:23 pm
- Location: Western Australia
Ok I got this info off good ol' Wiki
http://en.wikipedia.org/wiki/Mitsubishi_Starion
http://www.mitsubishi-motors.co.za/feat ... irius-Dash
http://en.wikipedia.org/wiki/Mitsubishi_Starion
http://www.mitsubishi-motors.co.za/feat ... irius-Dash
We all know about the 4WD starions. I've seen one in the flesh. They are north-south orientation and has nothing in common drivetrain-wise with the VR4.
You realise that bolting in the VR4 motor will mean;
-Changing the starion gearbox or running an adapter plate
-Changing the VR4 accessory positions (A/C, P/S, alt etc)
-Altering the water outlet
-New exhaust dump pipe & I/C pipes.
-Modify inlet manifold t/b position
-Probably new exhaust manifold (depending on if you have a custom one in the VR4 that by some miracle fits in the Starion engine bay)
-11ty billion little things.
Now think about the stuff that may need upgrading on the starion to suit more powers. LSD, good brakes, suspension etc.
Go for gold!
You realise that bolting in the VR4 motor will mean;
-Changing the starion gearbox or running an adapter plate
-Changing the VR4 accessory positions (A/C, P/S, alt etc)
-Altering the water outlet
-New exhaust dump pipe & I/C pipes.
-Modify inlet manifold t/b position
-Probably new exhaust manifold (depending on if you have a custom one in the VR4 that by some miracle fits in the Starion engine bay)
-11ty billion little things.
Now think about the stuff that may need upgrading on the starion to suit more powers. LSD, good brakes, suspension etc.
Go for gold!
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
I'ld say just keep the VR-4 intact and go find a dud VR-4 engine to rob the DOHC parts from. No need to dismantle a perfectly good VR-4 just for the engine - as that's about all you'ld be able to use it from. I guess at least in Australia VR-4 parts would sell quite quickly.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
should easily get enough for a good VR4 to do a 1J conversion yourself...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Who is online
Users browsing this forum: No registered users and 58 guests