lowering a starion

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
toms starion
Big Dorifto
Posts: 73
Joined: Mon Jul 27, 2009 8:24 am
Location: adelaide

lowering a starion

Post by toms starion »

i want to lower my starion 2inchs all round is there any problems
that anybody knows of. who has lowered there car what springs did you
use
User avatar
Dash
*** Half Century Post ***
Posts: 50
Joined: Sat Jul 18, 2009 9:30 am
Location: New Zealand

Post by Dash »

I have just lowered my Starion.
Replaced all shocks with KYB shocks (rear shocks had to be customised) and lowered the car with Dobi sport springs.
It only lowered the car 1 inch though. And from what I was told that is lowest you can go, unless
A) You get some custom springs made - fairly expensive.
or
B) Get your springs compressed. Which is what I am going for, to get it down that extra Inch.
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

LOL... oh no... you can got LOOOOOOOWER...

Check my car out, lowest Starion in the WORLD.
http://forums.austarion.com/viewtopic.php?t=11755

-Robert
Image
Now: Australian Compatible!
toms starion
Big Dorifto
Posts: 73
Joined: Mon Jul 27, 2009 8:24 am
Location: adelaide

Post by toms starion »

so it will be bad if i put 2inch lowered springs in front and back..
i can get em for $300 front and rear
User avatar
bigd
Enthusiast
Posts: 530
Joined: Tue Aug 15, 2006 10:08 pm
Location: Whangarei, New Zealand

Post by bigd »

You can buy an angle grinder for about 30 bucks at Bunnings. :wink:
User avatar
Dash
*** Half Century Post ***
Posts: 50
Joined: Sat Jul 18, 2009 9:30 am
Location: New Zealand

Post by Dash »

If you do it, do it properly, not half assed, your suspension system is very important. And i'm not saying that Komeuppance has done it wrong, he has just gone about it a different way, but personally I don't have the skills, equipment or inclination, so I just pay someone to do it. How many kms has your Starion done? if it's getting up there in mileage I would recommend replacing your shocks.
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

bigd wrote:You can buy an angle grinder for about 30 bucks at Bunnings. :wink:
$20 mate :wink: [/img]
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

bigd wrote:You can buy an angle grinder for about 30 bucks at Bunnings. :wink:
Makita one way adjustables?
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

Dash wrote:If you do it, do it properly, not half assed, your suspension system is very important. And i'm not saying that Komeuppance has done it wrong, he has just gone about it a different way, but personally I don't have the skills, equipment or inclination, so I just pay someone to do it. How many kms has your Starion done? if it's getting up there in mileage I would recommend replacing your shocks.
Doing it the was komeuppance did it is the right way, using a shorter shock gives him more shock travel than you would have if you just used lowered springs.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
User avatar
bigd
Enthusiast
Posts: 530
Joined: Tue Aug 15, 2006 10:08 pm
Location: Whangarei, New Zealand

Post by bigd »

Junkers wrote:
bigd wrote:You can buy an angle grinder for about 30 bucks at Bunnings. :wink:
Makita one way adjustables?
I LOLD
User avatar
Dash
*** Half Century Post ***
Posts: 50
Joined: Sat Jul 18, 2009 9:30 am
Location: New Zealand

Post by Dash »

RiceThief wrote:
Dash wrote:If you do it, do it properly, not half assed, your suspension system is very important. And i'm not saying that Komeuppance has done it wrong, he has just gone about it a different way, but personally I don't have the skills, equipment or inclination, so I just pay someone to do it. How many kms has your Starion done? if it's getting up there in mileage I would recommend replacing your shocks.
Doing it the was komeuppance did it is the right way, using a shorter shock gives him more shock travel than you would have if you just used lowered springs.
Isn't it the spring that determines the height of your car?? shocks don't take any weight at all.
Entaran
I love starions
Posts: 448
Joined: Mon Sep 27, 2004 6:07 pm
Location: Ballarat, Vic

Post by Entaran »

He didn't say the shock determined height. He said he got better travel out of it.

Also, if you chop your springs, sell your starion and go buy a VN. Do it properly, spring rates are far too important to make ryobi specials.
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

Dash wrote:Isn't it the spring that determines the height of your car?? shocks don't take any weight at all.
The ride height of the car is determined by the length of your strut and the height of the springs. Reducing the height of the springs comes at the cost of suspension travel. So by reducing the length of the strut and putting in a shorter shock you keep the same suspension travel and get the lowered ride height
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
toms starion
Big Dorifto
Posts: 73
Joined: Mon Jul 27, 2009 8:24 am
Location: adelaide

Post by toms starion »

thanks for the replys
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

Dash wrote:I have just lowered my Starion.
Replaced all shocks with KYB shocks (rear shocks had to be customised) and lowered the car with Dobi sport springs.
It only lowered the car 1 inch though. And from what I was told that is lowest you can go, unless
A) You get some custom springs made - fairly expensive.
or
B) Get your springs compressed. Which is what I am going for, to get it down that extra Inch.
Hey, where did you get your dobi springs from and how muchey man? :D
Post Reply

Who is online

Users browsing this forum: No registered users and 87 guests