Neons

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Post Reply
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Neons

Post by bridgey »

does anybody in NZ know the best place to get some neon style LED lights?
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Please tell me your not putting neons on a starion :roll:
Image
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

haha not under car fast and furious type if thats what you mean.
i only want a couple of short ones that i can wire in to my sound system so that they pulse with the music
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

fUllY HeKtiK uLeh!!!!!11111
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

Group Buy?!?! WTF!! :wtf:
SR20 powered starion what have I done..... :P
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

Your not planning on having a rave in your car are you? What do you do for a job?

I'm pretty sure autopassion would have something on the shelf to cater for that.
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

Junkers wrote:Your not planning on having a rave in your car are you? What do you do for a job?

I'm pretty sure autopassion would have something on the shelf to cater for that.
haha no rave, I just think it would look cool dont know how good itd look with metallica though.
my job? i work at bunnings, autopassion? where are they?
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

They are at the end of moorhouse ave, where deans ave meets up. (Where the corner used to be.) I'm pretty sure we sell them at repco as well but not 100% about those audio responsive ones.
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

Junkers wrote:They are at the end of moorhouse ave, where deans ave meets up. (Where the corner used to be.) I'm pretty sure we sell them at repco as well but not 100% about those audio responsive ones.
which repco? they don't need to be audio responsive as I'll just wire them to the amp
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
kiwieurospec
Enthusiast
Posts: 605
Joined: Thu Apr 06, 2006 2:21 pm
Location: Christchurch,New Zealand

Post by kiwieurospec »

Autopassion was walking distance from work, they quickly packed up and disappeared a few months back, no signs to say they moved. I'd call runner like the car yards and workshops lately.
1985 Widebody Factory Four Wheel Steering
1986 Euro Spec-ABS,LSD etc
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

Repco Burnside, only work on Saturdays though. How do you plan on wiring them to the amp out of curiosity?

Kiwieurospec - Yeah seems like a few have been picked off recently.
Last edited by Junkers on Wed Aug 05, 2009 6:08 pm, edited 1 time in total.
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

im not too sure on the exact details yet.....willl let you know when ive figured out the kinks
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
kiwieurospec
Enthusiast
Posts: 605
Joined: Thu Apr 06, 2006 2:21 pm
Location: Christchurch,New Zealand

Post by kiwieurospec »

Junkers wrote:Repco Burnside, only work on Saturdays though. How do you plan on wiring them to the amp out of curiosity?

Kiwieurospec - Yeah seems like a few have been picked off recently.
Yeah he is internet based now as most of his sales were international. No need for a shop.
1985 Widebody Factory Four Wheel Steering
1986 Euro Spec-ABS,LSD etc
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

Show Image: Image
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Post by Ashgan »

Why get neons, if you want to make your starion look like the picture, just drop some acid... rofl

-Ash
Friends call me Ashgan or Ash... But you can call me failchanic. If there's a routine maintenance job that exists on a starion, then chances are i've failed at it.

First attempt fails include:
-Changing indicator light
-Changing spark plugs
-Changing belts
-Changing airfilter
-Changing oil
-Removing rear strut
-Replacing front strut
Post Reply

Who is online

Users browsing this forum: No registered users and 105 guests