Rattling shuddering

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Rattling shuddering

Post by Ashgan »

Hey guys, what would a shuddering/rattling sound coming from the rear when taking off and rounding corners at lower speeds be an indicator of?

Would this be my wheel bearings going? My other theory is bushings going on the rear left (after replacing susp. all round and replacing a missing bushing on the idler arm *most* of my left side bump steer is gone, but not all of it) is that likely to cause a shuddering noise?

Cheers,

-Ash
Friends call me Ashgan or Ash... But you can call me failchanic. If there's a routine maintenance job that exists on a starion, then chances are i've failed at it.

First attempt fails include:
-Changing indicator light
-Changing spark plugs
-Changing belts
-Changing airfilter
-Changing oil
-Removing rear strut
-Replacing front strut
Top
sucka
I like starions more
Posts: 177
Joined: Tue Dec 21, 2004 11:35 pm
Location: Perth, western Australia

Post by sucka »

sounds like the driveshaft cv's might be worn, I'd be checking them first.
Top
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:
Contact Komeuppance

Post by Komeuppance »

Your limited slip differential is locking up, the clutch plates are chattering. Fluid low, or old/really bad, add new fluid with friction modifyer.

Haha... assuming you have a LSD.

-Robert
Image
Now: Australian Compatible!
Top
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:
Contact Alspos

Post by Alspos »

Are the wheels spinning? Rooted shocks.
Top
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Post by Ashgan »

I got some lol's out of those replies...

Just replaced shocks, i assumed that was the problem, along with the cause of my bump steer, but not so.

LSD? I wish! Pretty certain i just got the stockers open wheeler diff for the JA.

I'm pretty certain it's a diff/CV/wheel baring problem, or bushings, i dunno.

Actually, starting to think about it now, i think there is practically only ever power going to the right side wheel :?

So CV? Should i just take it into a place to get checked out?

-King
Friends call me Ashgan or Ash... But you can call me failchanic. If there's a routine maintenance job that exists on a starion, then chances are i've failed at it.

First attempt fails include:
-Changing indicator light
-Changing spark plugs
-Changing belts
-Changing airfilter
-Changing oil
-Removing rear strut
-Replacing front strut
Top
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:
Contact Alspos

Post by Alspos »

Take them out. If it's stiff...that's the problem. If not...look elsewhere.
Top
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Post by Ashgan »

Take what out lol... Everything LOL ?

I wish i had a car pit or some sort of mechanism to make working under the easier...

-Ash
Friends call me Ashgan or Ash... But you can call me failchanic. If there's a routine maintenance job that exists on a starion, then chances are i've failed at it.

First attempt fails include:
-Changing indicator light
-Changing spark plugs
-Changing belts
-Changing airfilter
-Changing oil
-Removing rear strut
-Replacing front strut
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

4 jackstands and a trolley jack? that's what i used...
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:
Contact enthuzed

Post by enthuzed »

Alspos wrote:Take them out. If it's stiff...that's the problem. If not...look elsewhere.
Al was thinking about his member again...never mind him... :D
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Top
Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 106 guests