Where to buy a braided brake line kit from?

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Where to buy a braided brake line kit from?

Post by Lummy »

I'm chasing a full 8 piece braided brake line kit for a Starion (well, Import Scorpion anyway - same set up)....

Any ideas where I can get these?
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Contact Dale at Castle Hill Exhaust in Sydney - he is involved in a company that does this sort of stuff using your existing lines as samples.

Also try Motorsport Connections as Seven Hills - they carry assorted braided lines of varying lengths etc.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

http://www.braidedhoses.com.au/wherebuy-nsw.html

I got mine from brake pro in parramatta.. they charge 110 per hose, but for the starion, the rear ones apparently need 2 sets of fittings, so they charged 110 for each of the front, and 160 for each of the rear.

these are adr approved as well.. but i don't suppose that's a concern to you considering yours is a race car eh?

have also been referred to the following website before, but have no experience with them: http://www.racebrakessydney.com.au/
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

Yep, it's for a track car, so I give no fark for ADR's.

$110 per hose seems pretty steep when compared to this...

http://www.starquestclub.com/forum/inde ... opic=80463

I realise that's in the States, but even with a fair whack of postage, it's way cheaper than anything else I can find.

Thoughts?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

for a track car with no compliance issues, i'd go the yank option :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

Thanks Redzone, is it safe to assume the yank ones would be pretty good quality?
Komeuppance
Enthusiast
Posts: 607
Joined: Fri Nov 16, 2007 3:50 pm
Location: Oregon, USA
Contact:

Post by Komeuppance »

Yeah... if they're DOT certed (Prob similar to your ADR) then that ish is good to go.

Those guys should ship out to you... he's not a hater.

-Robert
Image
Now: Australian Compatible!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah i remember brendan starting a group buy thread on em, which got canned for obvious reasons..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

I did bring in a set of lines for a guy down south with a track car. And i got a set for me as well(shhhh). They are US DOT approved and awesome quality. Cheap as well. Im bringing some more stuff over from that guy so if your interested i can get you a price. Save on shipping.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
cheaterparts
I love starions
Posts: 351
Joined: Mon Sep 27, 2004 7:36 pm
Location: melbourne aust

Re: Where to buy a braided brake line kit from?

Post by cheaterparts »

Lummy wrote:I'm chasing a full 8 piece braided brake line kit for a Starion (well, Import Scorpion anyway - same set up)....

Any ideas where I can get these?
I made up my own for the sigma - just got the fittings and braided hose from Nordons and bolted them together

http://www.yellowpages.com.au/bi/norden ... 36856.html

there the yellow pages link - these guys have about every race fitting known to man
cheater

2.6 sigma IPRA spec

projects
E21 323 JPS bimmer
type 7 clone sports car
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests