Where to buy a braided brake line kit from?
Where to buy a braided brake line kit from?
I'm chasing a full 8 piece braided brake line kit for a Starion (well, Import Scorpion anyway - same set up)....
Any ideas where I can get these?
Any ideas where I can get these?
Contact Dale at Castle Hill Exhaust in Sydney - he is involved in a company that does this sort of stuff using your existing lines as samples.
Also try Motorsport Connections as Seven Hills - they carry assorted braided lines of varying lengths etc.
Also try Motorsport Connections as Seven Hills - they carry assorted braided lines of varying lengths etc.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
http://www.braidedhoses.com.au/wherebuy-nsw.html
I got mine from brake pro in parramatta.. they charge 110 per hose, but for the starion, the rear ones apparently need 2 sets of fittings, so they charged 110 for each of the front, and 160 for each of the rear.
these are adr approved as well.. but i don't suppose that's a concern to you considering yours is a race car eh?
have also been referred to the following website before, but have no experience with them: http://www.racebrakessydney.com.au/
I got mine from brake pro in parramatta.. they charge 110 per hose, but for the starion, the rear ones apparently need 2 sets of fittings, so they charged 110 for each of the front, and 160 for each of the rear.
these are adr approved as well.. but i don't suppose that's a concern to you considering yours is a race car eh?
have also been referred to the following website before, but have no experience with them: http://www.racebrakessydney.com.au/
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
Yep, it's for a track car, so I give no fark for ADR's.
$110 per hose seems pretty steep when compared to this...
http://www.starquestclub.com/forum/inde ... opic=80463
I realise that's in the States, but even with a fair whack of postage, it's way cheaper than anything else I can find.
Thoughts?
$110 per hose seems pretty steep when compared to this...
http://www.starquestclub.com/forum/inde ... opic=80463
I realise that's in the States, but even with a fair whack of postage, it's way cheaper than anything else I can find.
Thoughts?
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
for a track car with no compliance issues, i'd go the yank option :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Enthusiast
- Posts: 607
- Joined: Fri Nov 16, 2007 3:50 pm
- Location: Oregon, USA
- Contact:
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
yeah i remember brendan starting a group buy thread on em, which got canned for obvious reasons..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
I did bring in a set of lines for a guy down south with a track car. And i got a set for me as well(shhhh). They are US DOT approved and awesome quality. Cheap as well. Im bringing some more stuff over from that guy so if your interested i can get you a price. Save on shipping.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
- cheaterparts
- I love starions
- Posts: 351
- Joined: Mon Sep 27, 2004 7:36 pm
- Location: melbourne aust
Re: Where to buy a braided brake line kit from?
I made up my own for the sigma - just got the fittings and braided hose from Nordons and bolted them togetherLummy wrote:I'm chasing a full 8 piece braided brake line kit for a Starion (well, Import Scorpion anyway - same set up)....
Any ideas where I can get these?
http://www.yellowpages.com.au/bi/norden ... 36856.html
there the yellow pages link - these guys have about every race fitting known to man
cheater
2.6 sigma IPRA spec
projects
E21 323 JPS bimmer
type 7 clone sports car
2.6 sigma IPRA spec
projects
E21 323 JPS bimmer
type 7 clone sports car
Who is online
Users browsing this forum: No registered users and 66 guests