WTB (NZ preferably) 2x rear Lower control arm bolts

Lunacy · Post by **Lunacy** » Fri Jul 03, 2009 1:06 pm

As title says, have advertised before but thought id give it another try before i import some from overseas.
These are the bolts that hold the hub to the rear arm, big buggers about 10" long.
Need the bolts and nuts, and thread on bolts must be all good.
If anyone in NZ has these please PM me how much your after for them.
Cheers
Bryce

Lunacy · Post by **Lunacy** » Thu Jul 09, 2009 12:52 pm

Bump anyone anywhere who has these let me know :(

MrBishi · Post by **MrBishi** » Thu Jul 09, 2009 12:55 pm

Have you tried a bolt shop? I suspect they won't be much help.

Failing that go to a general engineering shop. You should be able to get some made for not too much. I'd suggest considering using a long stud type bolt with nuts on both ends. This should be piss-easy for an engineer to make out of some bar stock and 5 mins with a thread die.

Lunacy · Post by **Lunacy** » Thu Jul 09, 2009 1:55 pm

MrBishi wrote:Have you tried a bolt shop? I suspect they won't be much help.

Failing that go to a general engineering shop. You should be able to get some made for not too much. I'd suggest considering using a long stud type bolt with nuts on both ends. This should be piss-easy for an engineer to make out of some bar stock and 5 mins with a thread die.

Yeah tried a fastener place, said they had nothing like them.
Worst case scenario il have an engineer fab some up but would rather just find someone who has them sitting around and grab them :)

redzone · Post by **redzone** » Thu Jul 09, 2009 9:17 pm

i have assloads of them here mate if u get desperate.

dirtygalant · Post by **dirtygalant** » Fri Jul 10, 2009 7:54 am

there's a few Starions being wrecked on trademe at the moment you should be able to get them from one of them at least.

Lunacy · Post by **Lunacy** » Fri Jul 10, 2009 9:13 am

Thanks Dave il prob send u a PM shortly.
DirtyG ive tried all those ones being wrecked on TM and they either dont have them, or cant be bothered pulling them out.

kiwieurospec · Post by **kiwieurospec** » Fri Jul 10, 2009 11:54 am

Lunacy wrote: cant be bothered pulling them out.

Guilty. I just thought I might have some spare though from the 5 stud conversion I have, will check tonite if they are there and txt you.

I may remove from my car for you at the weekend if I find something to put in there to keep it a roller.

kiwieurospec · Post by **kiwieurospec** » Fri Jul 10, 2009 12:41 pm

Yeah I've got some, post them to you Monday.

Lunacy · Post by **Lunacy** » Fri Jul 10, 2009 1:39 pm

kiwieurospec wrote:Yeah I've got some, post them to you Monday.

Cheers mate ur a lifesaver :)
Let me know how much u want for them, and if need be i can send u my old ones to keep urs a roller, nuts just wont do up thats all.
Ta again mate :)

kiwieurospec · Post by **kiwieurospec** » Thu Jul 16, 2009 8:43 am

Been a bit slack, just posted today. Send me back your old ones and I'll clean up the threads and use them.

Lunacy · Post by **Lunacy** » Thu Jul 16, 2009 12:20 pm

kiwieurospec wrote:Been a bit slack, just posted today. Send me back your old ones and I'll clean up the threads and use them.

No worries mate, have been stuck inside last couple of days as tweaked a nerve in my back doing the underbody on monday :(
PM me ur address again and il get em off to ya :) Ta again mate

kiwieurospec · Post by **kiwieurospec** » Thu Jul 16, 2009 12:37 pm

Haha tweaked my back Sunday, not Starion related though.

Sweet now though, return address on item.

Lunacy · Post by **Lunacy** » Thu Jul 16, 2009 2:16 pm

kiwieurospec wrote:Haha tweaked my back Sunday, not Starion related though.

Sweet now though, return address on item.

Haha random :) Im itching to get back into it since ive got another 5 weeks off now :)

Austarion

WTB (NZ preferably) 2x rear Lower control arm bolts

WTB (NZ preferably) 2x rear Lower control arm bolts

Who is online