Dizzy to link

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
palmystar
Dorifto!
Posts: 64
Joined: Sat Feb 10, 2007 8:55 am
Location: palmerston north new zealand

Dizzy to link

Post by palmystar »

I am trying to run multipoint in one of my cars using the standard dizzy and a link g4 storm. I can't figure out how the wiring with the dizzy and link should be. I am currently using a bosch ignition module. Can anyone help me out??
If its not broken. Don't fix it
Top
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

You have a optical dizzy right?
Top
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

I have a perfect optical dissy for sale if anyone needs one :D
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Top
User avatar
palmystar
Dorifto!
Posts: 64
Joined: Sat Feb 10, 2007 8:55 am
Location: palmerston north new zealand

Post by palmystar »

Am using standard starion dizzy
If its not broken. Don't fix it
Top
spinners
I like starions
Posts: 144
Joined: Sat Dec 17, 2005 1:48 pm
Location: Palmerston nth new zealand

Post by spinners »

When you grabbed that multipoint manifold,did you get the optical dizzy off the Galant aswell?
Whakaronga autowreckers should have plenty.I heard you have to use them or are better with A/M ecu's.
My brother has one if you can't find another.

(Shit One hundred post!!It's taken me 4 1/2 years rofl :D
**83 MITSUBISHI STARION DASH EX **
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

My old MPI setup uses standard Starion dizzy with a Link G1 V4 ecu. The V4 manual shows how to use a single module on a dizzy.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
User avatar
palmystar
Dorifto!
Posts: 64
Joined: Sat Feb 10, 2007 8:55 am
Location: palmerston north new zealand

Post by palmystar »

Went to whakaronga last week and they had no mpi sohc galants on the yard. Only had dohc or carby :? Had about 5 when i grabbed the manifold so should have grabbed it then. went to ace aswell and they had none. And couldn't find an l300 one either.

The guy i brought the link off reakoned it could be run off the standard dizzy but i can't get any results :flush
If its not broken. Don't fix it
Top
spinners
I like starions
Posts: 144
Joined: Sat Dec 17, 2005 1:48 pm
Location: Palmerston nth new zealand

Post by spinners »

palmystar wrote:Went to whakaronga last week and they had no mpi sohc galants on the yard. Only had dohc or carby :? Had about 5 when i grabbed the manifold so should have grabbed it then. went to ace aswell and they had none. And couldn't find an l300 one either.

The guy i brought the link off reakoned it could be run off the standard dizzy but i can't get any results :flush
Haha,I got a couple cheap about 4 months back from whakaronga,modifed and sold them to people wanting them for the same reason.
Did you ring Link technical support?They are helpful when it comes to troubleshooting?
**83 MITSUBISHI STARION DASH EX **
Top
Post Reply

Return to “Technical”

Who is online

Users browsing this forum: No registered users and 14 guests