GB Feeler: Star-Orion Braided Oilcooler Lines

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

GB Feeler: Star-Orion Braided Oilcooler Lines

Post by JD_Stazza_Brendan »

JR in the US is now getting into making replacement oil cooler lines. So im going to see if there is any interest in them here in Aus/NZ.

They are made very similar to the clutch lines that i did the GB of earlier in the year. They are teflon cored, stainless braided lines with a PVC covering.
Image
Only colours available this time are Silver, Blue or Red.

Price hasnt been finalized but its looking to be around the $150 USD shipped.(American not Australian $) which is roughly $210 Aus at the moment.

At the moment the ends are 1 end with 90degree bend and the opposite end a banjo bolt. Both banjo or both 90's are being looked into.
Im hoping to buy a set soon to test fit to make sure they will fit the Aussie car without any issues. Final price depends on how much interest there is.
So post up if you would be up for a set.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:
Contact redzone

Post by redzone »

i'm up for it if they fit the aussie setup
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

I will be test fitting a set and getting final price before definatly starting GB. I have given JR some measurements and they will be long enough. Just have to check the end fittings go in and dont interfere with anything.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:
Contact WidebodyWoody

Post by WidebodyWoody »

Would be interested but will have to talk my wife into letting me spend the money now that I am building a house.
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Tell her they are braided lines for the kitchen sink. :D
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

JD_Stazza_Brendan wrote:Tell her they are braided lines for the kitchen sink. :D
Not as silly as it sounds as now plumbers use braided lines to connect the water outlet in the wall to whatever instead of bent on site copper pipe so you may just manage to pull the wool over her eyes this time and get away with it :)
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Top
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

Or.... tell her they are for the automatic washing machine in the laundry, they use braided lines as well these days. :)
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
Top
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Hey Panda there may be more & more people younger than you BUT almost everybody is younger than me :(
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Top
User avatar
MR Bender
Enthusiast king
Posts: 754
Joined: Sun Nov 11, 2007 8:01 pm
Location: Perth Western Australia (SOR)

Post by MR Bender »

i would like one.
(i dont have to ask anyone to spend my money) :D
Bite my shiny metal ass!!!

Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
Top
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:
Contact WidebodyWoody

Post by WidebodyWoody »

Yeah you didn't just go out and get a SECOND mortgage. :wtf:

Why oh why did I have to go and buy Land. It should be free LOL
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

New pic and details. Still waiting on the sample line to test fit.
Image

Kit one(represented by the line in silver) does so with clear or colored cover on stainless steel braided Teflon -6 line and -6an to banjo fittings on both lines, with the appropriate washers and new banjo bolts.

Kit two (represented by the line in black)has the same high quality line, in the same lengths, but with one banjo and one 90 degree -6 crimped on end going to a steel adapter. The ends are "interchangeable" so that you can flip the 90 degree fitting to either the oil cooler end, or the oil manifold end. This also has all the needed bolts and washers

Kit three(represented by the line in red) is once again the same length of high quality line, but with a 90 degree crimped on both ends of both lines. Just like the other offerings, all the needed fittings and washers for installation are included.

The regular pricing for these is as follows (in US $). Excluding shipping to Australia.
KIT 1 $155.00
KIT 2 $151.00
KIT 3 $148.00

When i start the GB after confirming they will fit the Aussie car i have been told the more numbers the cheaper the lines.

THESE KITS ARE NOT YET IN STOCK, as I am just getting the offering going, but they will be available in CLEAR, RED, BLACK, AND BLUE (not pictured, back-ordered at the time of pictures). Banjo fittings in silver or blue.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
User avatar
Xentro
Mine is bigger than yours
Posts: 307
Joined: Mon Jan 12, 2004 11:20 pm
Location: Holland

Post by Xentro »

They wil probably fit, because the 4G54 lines also fit if you put a 4G63 in it's place.
But with the stock lines you do have to bend them a little.
-------------------------------------------
83 2000EX runner.
88 2.0 Black Widebody DOHC evo 6 turbo at 1.7 bar
88 2.6 White Widebody. spun a bearing.
06 2.0 Lancer Wagon. daily driver.
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Ive taken pics and measurements for JR in the US and he seems to think they will fit as well. Just want to make sure 100% before i take payments for them and stuff people as well.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:
Contact redzone

Post by redzone »

i'm in for one kit, the first one, i think steve will be too. these make intercooler piping easier...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

redzone wrote:i'm in for one kit, the first one, i think steve will be too. these make intercooler piping easier...
noob question.. how? wouldn't they be the same length as the standard?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
Post Reply

Return to “Buy / Sell”

Who is online

Users browsing this forum: No registered users and 14 guests