Any Ideas???
Any Ideas???
Hi all, went to drive my starion today, started idling like a volkswagon, then popped the bonnet, and fuel was dripping down from the cross pipe near the eci. how do I go about fixing it, getting seals or whatnot?
Cheers
Cheers
-
- BATHURST LEGEND 07
- Posts: 948
- Joined: Sun Feb 18, 2007 4:46 pm
- Location: Brisbane
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Firstly unfortunately you'll have to find out exactly where it's leaking from, see if you can see which seal, etc.
Some of those seals are a bit hard to get. Even if you can take a photo, and post it up with roughly where you think it's leaking I might be able to help you work out which seals and where to get them
Cheers!
Some of those seals are a bit hard to get. Even if you can take a photo, and post it up with roughly where you think it's leaking I might be able to help you work out which seals and where to get them
Cheers!
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
this is why i dont like JA's so much anymore. leaking eci units are the death of these cars. it will be leaking from the top o ring seals on the injectors (unlikely) or the injectors themselves (likely). what you really need is a good s/h eci unit, bolt it on wholus bolus, as once you remove the injectors from the mixer they tend to leak out the rubber seal on the sides of the injector where the wires go in. and you cant buy injectors for them any more.
i have a good eci, pm me if you want it..
i have a good eci, pm me if you want it..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Geez m8 I was over there 3 weeks ago.I f you send me your mob no I think I can send you pics that way .BTW I don't sell rubbishTamgesic wrote:Hey oldfart..
How much for your MPI set up then? Do you know approx shipping prices to nz?
Cheers Rad
PS do you want it as it came off my car a couple of days ago ?? 60 mm tb & 580cc Rochester injectors cleaned , tested & flowed less than 100 k's ago ??????
Cheers
Rad :beer
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
http://forums.austarion.com/viewtopic.p ... eaking+eci
i don't recommend this though i have done it and there is no more leaking outside the unit.
i don't recommend this though i have done it and there is no more leaking outside the unit.
Who is online
Users browsing this forum: No registered users and 11 guests