What do we have here. . .
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
What do we have here. . .
Teaser pics, SOHC goodness
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
WidebodyWoody
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Cant remember the exact amount the sump holds, And it doesnt sit that much lower to the ground. It just expands outwards, not so much down more.
Hasnt been a problem for the other people running them.
Hasnt been a problem for the other people running them.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
davidbek95
- I've been here before
- Posts: 249
- Joined: Thu Jan 08, 2004 7:59 pm
- Location: beautiful QLD (mackay)
sump
i don't think anyone on this forum needs this type of sump,no-one will not make this amount of hp,kit would.
david
david
Re: sump
How much hp are you expecting ????????????????????????davidbek95 wrote:i don't think anyone on this forum needs this type of sump,no-one will not make this amount of hp,kit would.
david
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
-
RiceThief
- my mangina paid for my staz
- Posts: 2129
- Joined: Thu Jan 15, 2004 1:23 pm
- Location: Brisbane
Re: sump
what does hp got to do with how much latteral g's you can pull :Ddavidbek95 wrote:i don't think anyone on this forum needs this type of sump,no-one will not make this amount of hp,kit would.
david
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Re: sump
More then the current motors 145hp :DOLD FART wrote:How much hp are you expecting ????????????????????????davidbek95 wrote:i don't think anyone on this forum needs this type of sump,no-one will not make this amount of hp,kit would.
david
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
Hi Brendan,
Chris Collier did a great job with the motor, hopefully you can get it fitted and work out all the bits around it.
Importantly you aren't doing a simple engine swap but changing everything that makes the car go, and doing so in a way that everything has to be more precise. If you want my opinion on the install - When you are faced with saving a few $'s and doing things the quick way compared to spending the time and $ to do it right, definitely do things right as you will pay more in the long run doing it the quick way, and having to redo it properly. I'd suggest push lock fittings all around and spending the time to find a fabricator who spends the time to do a proper job.
Talking to Dave and looking at how he has done things will also be helpful and I'm happy to send pics of what Chris did for my car. Personally I would have shipped the car to Melbourne for Chris to do the whole job as it requires alot of skill - I would not try to do what you are doing myself.
Cheers
Troy
Chris Collier did a great job with the motor, hopefully you can get it fitted and work out all the bits around it.
Importantly you aren't doing a simple engine swap but changing everything that makes the car go, and doing so in a way that everything has to be more precise. If you want my opinion on the install - When you are faced with saving a few $'s and doing things the quick way compared to spending the time and $ to do it right, definitely do things right as you will pay more in the long run doing it the quick way, and having to redo it properly. I'd suggest push lock fittings all around and spending the time to find a fabricator who spends the time to do a proper job.
Talking to Dave and looking at how he has done things will also be helpful and I'm happy to send pics of what Chris did for my car. Personally I would have shipped the car to Melbourne for Chris to do the whole job as it requires alot of skill - I would not try to do what you are doing myself.
Cheers
Troy
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
This build definatly isnt being done on the cheap. No old parts are going to be used on the car. Prefer brand new or refurbished parts, Speedflow fittings and braided line used in as many places as possible. Cheap parts arnt even getting a look at.
I have a few touches i want to add to the car that cant be relayed to someone else building the car. I know about Daves setup. I originally helped him put the motor in his car when he got it back from Chris, and helped with a few smaller things.
I have a few touches i want to add to the car that cant be relayed to someone else building the car. I know about Daves setup. I originally helped him put the motor in his car when he got it back from Chris, and helped with a few smaller things.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
JD_Stazza_Brendan
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Time has come to start the build.
Ive now got sideskirts, JD front bumper and airdam, JD b-pillar vents.
Working on the rear subframe at the moment.
Old vs new
Ive joined the GB on polyurethane torque tube mounts and i have a bush kit coming for the control arms and swaybars. Bought new brake pads from Rice Thief, got the struts from the parts car do get the MR2 insert treatment, late model swaybars (larger then JA).
Should have the other control arm and torque tube crossmember blasted and painted tomorrow.
Ive now got sideskirts, JD front bumper and airdam, JD b-pillar vents.
Working on the rear subframe at the moment.
Old vs new
Ive joined the GB on polyurethane torque tube mounts and i have a bush kit coming for the control arms and swaybars. Bought new brake pads from Rice Thief, got the struts from the parts car do get the MR2 insert treatment, late model swaybars (larger then JA).
Should have the other control arm and torque tube crossmember blasted and painted tomorrow.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
Who is online
Users browsing this forum: No registered users and 51 guests