Rebuild woes

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

It seems the whole centre console was made from brittle plastic from the factory.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

redzone wrote:i've never had any insurmountable problem with any of mine.
that's cos you're a GOOD mechanic :P

WidebodyWoody wrote:I send my car to get that door panel repaired, and what happened? They fuckers almost snapped the centre console in half.
wtf?? what did they need to get at the centre console for? i would be checking that they haven't stolen anything or mucked up on the wiring down there.. the wiring is perhaps the only reason I can think of.. but even then.. dodgy bastards
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

yeah everything seemed fine, except 1) When I got the car back, that was broken, and 2) When I got the car back, my battery mysteriously died. Luckily it was less then 1 year old so it was replaced free.
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Redzone :
^^^ did u ask em for $50?
hehe - it was the wife that did it so asking for money would have been akin to me taking money out of my wallet and putting it back in. She did say sorry but I didnt detect any real remorse in her voice so I didnt speak to her for the rest of the day. (She knows I am pissed at her when I dont speak to her. )

It was a quiet night at our place that night. LOL
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
Darkelf
RiceKing!
Posts: 640
Joined: Thu Jan 08, 2004 2:25 pm
Location: Sydney

Post by Darkelf »

WANTSOM wrote:or when someone walks past the car on stands in the garage when you have the front bar and grill off and catches the side indicator plastic and snaps in clean in half. :x :glare:
Did you divorce them? :D
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

WANTSOM wrote:Redzone :
^^^ did u ask em for $50?
hehe - it was the wife that did it so asking for money would have been akin to me taking money out of my wallet and putting it back in. She did say sorry but I didnt detect any real remorse in her voice so I didnt speak to her for the rest of the day. (She knows I am pissed at her when I dont speak to her. )

It was a quiet night at our place that night. LOL
It seems that "HOT LIP & COLD SHOULDER " was on the menu 4 dinner that night LOL
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
crshbndct
Mine is bigger than yours
Posts: 251
Joined: Wed Dec 14, 2005 6:24 pm
Location: Whangarei, New Zealand

Post by crshbndct »

my ja got merciless thrashing, and very piss poor maintenance. only time it did any thing funny was when the battery was so flat it was reading 3 volts, jump started it and it ran strangely. this was after standing for about 4 months
new battery and it fired up straight away.
3 Most Important Sayings of Motor Car Racing:
1)"To Finish First, First You Must Finish" - Jackie Stewart
2)"For Speed, Add Lightness" - Colin Chapman
3)"Hondas Are Gay" - Valentino Rossi
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

first test drive

Post by Vulpes »

Took the car for a test drive over easter to try out the new clutch, turbo, intercooler and flav's ECU. It seemed to go ok, i took it very gentle. When i got back i smelled brakes ? seems the rear drivers wheel was almost locked solid due to the handbrake cable seizing up and not releasing. Anybvody ever had this trouble ? Thank God for donor cars !!!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yep handbrakes cables are VERY prone to sticking, i'd bet there's plenty out there driving around with one like that, without realising. also often the mechanism jams in the caliper and you have to get them rebuilt..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Darkelf
RiceKing!
Posts: 640
Joined: Thu Jan 08, 2004 2:25 pm
Location: Sydney

Post by Darkelf »

I had this problem with mine, there is a place in Brooky that can custom make them for a Staz but they aint cheap at $900 a pair!!! :o
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

$900 a pair for handbrake cables?? i can get em redone for $160 each!!!!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

LOL

I will need to get my handbrake done in the near future.. it doesn't hold all that well anymore..
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 12 guests