FS Link Computer set up for starion

JAS · Post by **JAS** » Sat Feb 21, 2009 7:23 pm

Ive had this in my garage for years and have decided to use a brand new one for the car.
Comes with ECU, Loom (is not the best). Two ingnitors, one New link and one Jay car unit. And dizzy.

Looking for around $500 for it

Ill put up a pic in a day or two

FST4RD · Post by **FST4RD** » Sun Feb 22, 2009 4:58 am

The guy that bought my starions looking for a cheap aftermarket ECU... try him?

JAS · Post by **JAS** » Mon Feb 23, 2009 5:32 pm

Show Image:

dirtygalant · Post by **dirtygalant** » Thu Feb 26, 2009 6:12 am

would this be sweet for twin cam with coil packs triggered by the CAS?

Do you know what link model it is exactly?

JAS · Post by **JAS** » Thu Feb 26, 2009 7:54 am

I emailed Link some pics and asked what it was. This is his reply

This is one of the very first G1 style ECU's, probably about 10-12yrs old. The sub board in there will suit a lot of reluctor type pick up vehicles, but not all. If you dare to mention it in your ad, $87.00 + GST will upgrade the sub board to suit the new owners car, and for a V5 upgrade @ $330.00 + GST, it can have a lot better firmware and the ability to be PC tuned (this includes the sub board upgrade to suit the new engine). A quick search on trademe should see you asking the going rate for them, I couldn't tell you what they are fetching these days. I hope that gives you enough to go on Jason, but feel free to contact us for anything further.
Regards,
Jurgen Biggelaar
Link Electrosystems
+64 3 348 8854

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Thu Feb 26, 2009 3:32 pm

I run a Link V4 Computer in my JA (2L SOHC MPI) and its a great ECU if your new to aftermarket managment.

Link Customer service is awesome as well. Having dealt with them.

Austarion

FS Link Computer set up for starion

FS Link Computer set up for starion

Who is online